[Fri May 25 23:51:34 2012] Detection parameters:
  Position = (239.2, 288.7) = 10 46 13.46 58 59 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.0 +/- 23.3
  Background counts = 118.8
  Rate = 0.009 +/- 0.0009

[Fri May 25 23:51:34 2012] Off-axis axis estimate = 4.35'
[Fri May 25 23:54:45 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri May 25 23:54:45 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri May 25 23:54:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.977
[Fri May 25 23:54:45 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.61"
[Sat May 26 00:33:52 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_src28.ximg exists
[Sat May 26 00:33:52 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat May 26 00:33:52 2012] Fit fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_src28 appears to have run properly
[Sat May 26 00:33:53 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat May 26 00:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat May 26 00:33:53 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat May 26 00:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat May 26 00:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 01:10:25 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.263127 pixels away
[Sat May 26 01:10:25 2012] Vigneting correction estimate = 1.000000
[Sat May 26 01:10:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 01:10:25 2012] Assessing source extent using major
[Sat May 26 01:10:25 2012] Source does appear to be extended
[Sat May 26 01:10:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 01:10:38 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sat May 26 01:10:38 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Sat May 26 01:10:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.977
[Sat May 26 01:10:38 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.61"
[Sat May 26 01:47:08 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_src27.ximg exists
[Sat May 26 01:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_src27.csv
[Sat May 26 01:47:08 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat May 26 01:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_src27.csv
[Sat May 26 01:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 01:47:08 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat May 26 01:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat May 26 01:47:08 2012] fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat May 26 01:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat May 26 01:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 02:18:10 2012] Spatial fit model total counts = 311.522000, observed total counts = 425.000000
[Sat May 26 02:18:10 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 26 02:18:10 2012] Vigneting correction estimate = 1.000000
[Sat May 26 02:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 02:18:10 2012] Assessing source extent using major
[Sat May 26 02:18:10 2012] Source does appear to be extended
[Sat May 26 02:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 02:18:20 2012] XMMSAS src. selection expression = ellipse(20757.962326, 25072.678314, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 02:18:20 2012] Writing source region out to fullrun_pn_xmm0554120101_pi300-10000_pass1_cl_src29_src.reg
[Sat May 26 02:18:20 2012] Extracting stamp from image fullrun_pn_xmm0554120101_pi300-10000_cl_sm2.00.img.gz, (202, 251) - (277, 326)
[Sat May 26 02:18:20 2012] XMMSAS bgd. selection expression = annulus(20757.962326, 25072.678314, 1087.500000, 2175.000000, X, Y) && !ellipse(18313.564468, 25030.893463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17717.903336, 23345.860535, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 02:18:20 2012] Writing fullrun_pn_xmm0554120101_pi300-10000_pass1_cl_src29.gif
[Sat May 26 02:32:59 2012] Mean detx,y = (2716.31, 5070.68) 
[Sat May 26 02:33:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 02:33:18 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 02:33:19 2012] Setting source spectrum file to fullrun_pn_xmm0554120101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May 26 02:33:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554120101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat May 26 02:42:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 26 02:42:06 2012] rmf not generated due to insufficient counts
[Sat May 26 02:59:56 2012] Updating aperture counts using extracted products
[Sat May 26 02:59:56 2012] Error reading totcts from fullrun_pn_xmm0554120101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May 26 02:59:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 02:59:57 2012] Using photon index=1.80, rate=0.00909, arf fullrun_pn_xmm0554120101_pi300-10000_pass1_cl_src29.arf
[Sat May 26 02:59:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 02:59:57 2012] Updating source flux to 3.2e-14
[Sat May 26 03:00:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting