[Fri May 25 23:52:05 2012] Detection parameters:
  Position = (191.3, 367.7) = 10 46 40.55 59 5 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.1 +/- 20.2
  Background counts = 56.0
  Rate = 0.005 +/- 0.0005

[Fri May 25 23:52:05 2012] Off-axis axis estimate = 9.25'
[Sat May 26 00:53:26 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sat May 26 00:53:26 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sat May 26 00:53:26 2012] source mask rpix=2.5, npix_max = 36, mask sum = 24, frac = 0.649
[Sat May 26 00:53:26 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.05"
[Sat May 26 01:10:18 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 26 01:10:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_src2.csv
[Sat May 26 01:10:18 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 26 01:10:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_src2.csv
[Sat May 26 01:10:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 01:10:18 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 26 01:10:18 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 26 01:10:18 2012] Fit fullrun_mos2_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 26 01:10:30 2012] Spatial fit model total counts = 303.486000, observed total counts = 282.000000
[Sat May 26 01:10:30 2012] Offset between fit and detection position for source 5 = 0.203135 pixels
[Sat May 26 01:10:30 2012] 306.153000 total counts/ 193.914000 bgd. counts: snr = 8.060077
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.203135 pixels
  Position = (191.5, 367.8) = 10 46 40.45 59 5 26.3
  Extent = 5.4 (4.3-6.7)", rotation angle = 0
  Source counts = 112.2 +/- 17.5
  Background counts = 193.9
  Rate = 0.003 +/- 0.0005
[Sat May 26 01:10:30 2012] Vigneting correction estimate = 1.000000
[Sat May 26 01:10:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 01:10:30 2012] Assessing source extent using major axis lower bound
[Sat May 26 01:10:30 2012] Source does appear to be extended
[Sat May 26 01:10:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 02:02:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 02:02:54 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Sat May 26 02:02:54 2012] source mask rpix=1.2, npix_max = 12, mask sum = 10, frac = 0.831
[Sat May 26 02:02:54 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.37"
[Sat May 26 02:18:05 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 26 02:18:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_src2.csv
[Sat May 26 02:18:05 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 26 02:18:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_src2.csv
[Sat May 26 02:18:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 02:18:06 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 26 02:18:06 2012] fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 26 02:18:06 2012] Fit fullrun_mos2_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 26 02:18:13 2012] Spatial fit model total counts = 303.537000, observed total counts = 282.000000
[Sat May 26 02:18:13 2012] Offset between fit and detection position for source 5 = 0.000823 pixels
[Sat May 26 02:18:13 2012] 306.200000 total counts/ 193.802000 bgd. counts: snr = 8.073827
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000823 pixels
  Position = (191.5, 367.8) = 10 46 40.45 59 5 26.3
  Extent = 5.4 (4.3-6.6)", rotation angle = 0
  Source counts = 112.4 +/- 17.5
  Background counts = 193.8
  Rate = 0.003 +/- 0.0005
[Sat May 26 02:18:13 2012] Vigneting correction estimate = 1.000000
[Sat May 26 02:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 02:18:13 2012] Assessing source extent using major axis lower bound
[Sat May 26 02:18:13 2012] Source does appear to be extended
[Sat May 26 02:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 02:46:59 2012] XMMSAS src. selection expression = ellipse(16614.245800, 31950.368600, 322.913409, 322.913409, 0.000000, X, Y)
[Sat May 26 02:46:59 2012] Writing source region out to fullrun_mos2_xmm0554120101_pi300-10000_pass1_cl_src5_src.reg
[Sat May 26 02:46:59 2012] Extracting stamp from image fullrun_mos2_xmm0554120101_pi300-10000_cl_sm2.00.img.gz, (173, 349) - (210, 386)
[Sat May 26 02:46:59 2012] XMMSAS bgd. selection expression = annulus(16614.245800, 31950.368600, 538.189015, 1076.378031, X, Y) && !ellipse(18100.581200, 32850.813200, 439.464013, 439.464013, 0.000000, X, Y)
[Sat May 26 02:46:59 2012] Writing fullrun_mos2_xmm0554120101_pi300-10000_pass1_cl_src5.gif
[Sat May 26 02:47:13 2012] Mean detx,y = (252.55, -12673.41) 
[Sat May 26 02:47:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 02:47:22 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 02:47:22 2012] Setting source spectrum file to fullrun_mos2_xmm0554120101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 26 02:47:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554120101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May 26 02:59:59 2012] Updating aperture counts using extracted products
[Sat May 26 02:59:59 2012] Error reading totcts from fullrun_mos2_xmm0554120101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 26 02:59:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 02:59:59 2012] Using photon index=1.80, rate=0.00329, arf fullrun_mos2_xmm0554120101_pi300-10000_pass1_cl_src5.arf
[Sat May 26 02:59:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 02:59:59 2012] Updating source flux to 8.6e-14