[Fri May 25 23:51:49 2012] Detection parameters:
  Position = (417.6, 276.4) = 10 44 33.03 58 58 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.8 +/- 17.6
  Background counts = 72.6
  Rate = 0.006 +/- 0.0008

[Fri May 25 23:51:49 2012] Off-axis axis estimate = 8.79'
[Sat May 26 00:33:53 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Sat May 26 00:33:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 00:33:53 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Sat May 26 00:33:53 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Sat May 26 00:33:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.82"
[Sat May 26 00:53:26 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 26 00:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_src1.csv
[Sat May 26 00:53:26 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 26 00:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_src1.csv
[Sat May 26 00:53:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 00:53:26 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 26 00:53:26 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 26 00:53:26 2012] Fit fullrun_mos1_xmm0554120101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 26 01:10:28 2012] Spatial fit model total counts = 426.667000, observed total counts = 413.000000
[Sat May 26 01:10:28 2012] Offset between fit and detection position for source 3 = 0.260014 pixels
[Sat May 26 01:10:28 2012] 424.639000 total counts/ 344.218000 bgd. counts: snr = 4.334636
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.260014 pixels
  Position = (417.4, 276.5) = 10 44 33.15 58 58 49.1
  Extent = 4.9 (4.1-6.1)", rotation angle = 0
  Source counts = 80.4 +/- 20.6
  Background counts = 344.2
  Rate = 0.002 +/- 0.0006
[Sat May 26 01:10:28 2012] Vigneting correction estimate = 1.000000
[Sat May 26 01:10:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 01:10:28 2012] Assessing source extent using major axis lower bound
[Sat May 26 01:10:28 2012] Source does appear to be extended
[Sat May 26 01:10:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 01:47:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 01:47:08 2012] Initial guess for spatial extent in simple fitting = 4.90"
[Sat May 26 01:47:08 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.851
[Sat May 26 01:47:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.90"
[Sat May 26 02:02:54 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 02:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_src1.csv
[Sat May 26 02:02:54 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 02:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_src1.csv
[Sat May 26 02:02:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 02:02:54 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 02:02:54 2012] fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 02:02:54 2012] Fit fullrun_mos1_xmm0554120101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 26 02:18:12 2012] Spatial fit model total counts = 299.833000, observed total counts = 292.000000
[Sat May 26 02:18:12 2012] Offset between fit and detection position for source 3 = 0.007710 pixels
[Sat May 26 02:18:12 2012] 299.358300 total counts/ 217.992000 bgd. counts: snr = 5.510922
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007710 pixels
  Position = (417.4, 276.5) = 10 44 33.15 58 58 49.0
  Extent = 5.0 (4.1-6.2)", rotation angle = 0
  Source counts = 81.4 +/- 17.3
  Background counts = 218.0
  Rate = 0.002 +/- 0.0005
[Sat May 26 02:18:12 2012] Vigneting correction estimate = 1.000000
[Sat May 26 02:18:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 02:18:12 2012] Assessing source extent using major axis lower bound
[Sat May 26 02:18:12 2012] Source does appear to be extended
[Sat May 26 02:18:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 02:42:49 2012] XMMSAS src. selection expression = ellipse(36264.116800, 24009.558000, 298.230609, 298.230609, 0.000000, X, Y)
[Sat May 26 02:42:49 2012] Writing source region out to fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3_src.reg
[Sat May 26 02:42:49 2012] Extracting stamp from image fullrun_mos1_xmm0554120101_pi300-10000_cl_sm2.00.img.gz, (400, 259) - (435, 294)
[Sat May 26 02:42:49 2012] XMMSAS bgd. selection expression = annulus(36264.116800, 24009.558000, 497.051014, 994.102029, X, Y)
[Sat May 26 02:42:49 2012] Writing fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3.gif
[Sat May 26 02:42:51 2012] Mean detx,y = (7962.63, -6152.42) 
[Sat May 26 02:42:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 02:43:00 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 02:43:00 2012] Setting source spectrum file to fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 26 02:43:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 26 02:45:43 2012] Not generating rmf since there are only 81 counts
[Sat May 26 02:45:43 2012] rmf not generated due to insufficient counts
[Sat May 26 02:59:58 2012] Updating aperture counts using extracted products
[Sat May 26 02:59:58 2012] Error reading totcts from fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 26 02:59:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 02:59:58 2012] Using photon index=1.80, rate=0.00246, arf fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3.arf
[Sat May 26 02:59:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 02:59:58 2012] Updating source flux to 5.7e-14
[Sat May 26 03:00:00 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 26 03:00:01 2012] xmm0554120101/analysis//spectral/fullrun_mos1_xmm0554120101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete