[Wed Mar 21 00:45:40 2012] Detection parameters:
  Position = (313.2, 304.1) = 17 46 14.45 -32 15 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 485.1 +/- 37.8
  Background counts = 159.9
  Rate = 0.008 +/- 0.0006

[Wed Mar 21 00:45:40 2012] Off-axis axis estimate = 1.15'
[Wed Mar 21 01:11:12 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 01:11:12 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Mar 21 01:11:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Wed Mar 21 01:11:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.00"
[Wed Mar 21 01:25:39 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 01:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 01:25:39 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 01:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 01:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 01:25:39 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 01:25:39 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 01:25:39 2012] Fit fullrun_pn_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 21 03:38:05 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Mar 21 03:38:05 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 03:38:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 03:38:05 2012] Assessing source extent using major
[Wed Mar 21 03:38:05 2012] Source does appear to be extended
[Wed Mar 21 03:38:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 03:38:26 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 03:38:26 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Mar 21 03:38:26 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Wed Mar 21 03:38:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.00"
[Wed Mar 21 03:50:11 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 21 03:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 03:50:11 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 21 03:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 03:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 03:50:11 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 21 03:50:11 2012] fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 21 03:50:11 2012] Fit fullrun_pn_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 21 04:38:13 2012] Source 1 is offset by 3.061082 and -7.333998 pixels which is larger than
2 X fitted extent = 6.438345 x 6.438345, not incorporating fit results
[Wed Mar 21 04:38:13 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 04:38:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 04:38:13 2012] Assessing source extent using major
[Wed Mar 21 04:38:13 2012] Source does appear to be extended
[Wed Mar 21 04:38:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:38:27 2012] XMMSAS src. selection expression = ellipse(27199.654144, 26408.580200, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 04:38:27 2012] Writing source region out to fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 21 04:38:27 2012] Extracting stamp from image fullrun_pn_xmm0553950201_pi300-10000_cl_sm2.00.img.gz, (276, 267) - (351, 342)
[Wed Mar 21 04:38:27 2012] XMMSAS bgd. selection expression = annulus(27199.654144, 26408.580200, 1087.500000, 2175.000000, X, Y) && !ellipse(26878.948400, 27702.038800, 1456.761642, 1430.505641, -0.000000, X, Y) && !ellipse(28720.580000, 26592.086000, 1193.856034, 1193.856034, 0.000000, X, Y) && !ellipse(29484.545807, 27970.855194, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:38:27 2012] Writing fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1.gif
[Wed Mar 21 04:51:31 2012] Mean detx,y = (228.60, 987.94) 
[Wed Mar 21 04:52:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 04:52:38 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 04:52:39 2012] Setting source spectrum file to fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 04:52:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 21 05:31:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 05:31:31 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:45:45 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:45:45 2012] Error reading totcts from fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 06:45:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:45:45 2012] Using photon index=1.80, rate=0.00823, arf fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 06:45:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:45:45 2012] Updating source flux to 2.1e-14
[Wed Mar 21 06:48:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 21 06:49:08 2012] xmm0553950201/analysis//spectral/fullrun_pn_xmm0553950201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete