[Wed Mar 21 00:46:49 2012] Detection parameters:
  Position = (313.5, 427.0) = 17 46 14.35 -32 6 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1024.5 +/- 39.0
  Background counts = 40.2
  Rate = 0.02 +/- 0.0009

[Wed Mar 21 00:46:50 2012] Off-axis axis estimate = 9.38'
[Wed Mar 21 02:52:51 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 02:52:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 02:52:51 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Mar 21 02:52:51 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.124
[Wed Mar 21 02:52:51 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.12"
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar 21 03:38:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src2.csv
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar 21 03:38:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src2.csv
[Wed Mar 21 03:38:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar 21 03:38:00 2012] Fit fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Mar 21 03:38:18 2012] Warning, spatial fit 2 centroid is now closest to src. 10
[Wed Mar 21 03:38:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 03:38:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 03:38:18 2012] Assessing source extent using major
[Wed Mar 21 03:38:18 2012] Source does appear to be extended
[Wed Mar 21 03:38:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:19:18 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 04:19:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 04:19:18 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Mar 21 04:19:18 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.124
[Wed Mar 21 04:19:18 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.12"
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 21 04:38:11 2012] Fit fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 21 04:38:11 2012] Fit fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar 21 04:38:20 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.375511 pixels away
[Wed Mar 21 04:38:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 04:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 04:38:20 2012] Assessing source extent using major
[Wed Mar 21 04:38:20 2012] Source does appear to be extended
[Wed Mar 21 04:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 06:24:28 2012] Counts = 1024.475952, rescaling region sizes by 2.000000
[Wed Mar 21 06:24:28 2012] XMMSAS src. selection expression = ellipse(27225.569885, 37096.480286, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 21 06:24:28 2012] Writing source region out to fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 21 06:24:28 2012] Extracting stamp from image fullrun_mos2_xmm0553950201_pi300-10000_cl_sm2.00.img.gz, (238, 352) - (388, 502)
[Wed Mar 21 06:24:28 2012] XMMSAS bgd. selection expression = annulus(27225.569885, 37096.480286, 4350.000000, 8700.000000, X, Y) && !ellipse(26880.878000, 27695.154200, 1241.949636, 1241.949636, 0.000000, X, Y)
[Wed Mar 21 06:24:28 2012] Writing fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src4.gif
[Wed Mar 21 06:28:37 2012] Mean detx,y = (-979.45, 9421.46) 
[Wed Mar 21 06:28:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 06:31:09 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 06:31:09 2012] Setting source spectrum file to fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 21 06:31:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 21 06:38:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 06:38:43 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:45:46 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:45:46 2012] Error reading totcts from fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 21 06:45:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:45:47 2012] Using photon index=1.80, rate=0.0228, arf fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src4.arf
[Wed Mar 21 06:45:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:45:47 2012] Updating source flux to 3.8e-13
[Wed Mar 21 06:47:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting