[Wed Mar 21 00:46:49 2012] Detection parameters:
  Position = (309.7, 318.9) = 17 46 15.64 -32 14 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52826.8 +/- 271.8
  Background counts = 71.6
  Rate = 0.6 +/- 0.003

[Wed Mar 21 00:46:50 2012] Off-axis axis estimate = 1.70'
[Wed Mar 21 02:52:51 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 02:52:51 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Mar 21 02:52:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Mar 21 02:52:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 03:38:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 03:38:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 03:38:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 03:38:00 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 03:38:00 2012] Fit fullrun_mos2_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 21 03:38:18 2012] Spatial fit model total counts = 49214.600000, observed total counts = 47233.000000
[Wed Mar 21 03:38:18 2012] Offset between fit and detection position for source 1 = 0.178076 pixels
[Wed Mar 21 03:38:18 2012] 49295.800000 total counts/ 13155.700000 bgd. counts: snr = 315.088367
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.178076 pixels
  Position = (309.5, 318.9) = 17 46 15.70 -32 14 1.7
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 36140.1 +/- 222.0
  Background counts = 13155.7
  Rate = 0.4 +/- 0.003
[Wed Mar 21 03:38:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 03:38:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 03:38:18 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 03:38:18 2012] Source does appear to be extended
[Wed Mar 21 03:38:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:19:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 04:19:18 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Wed Mar 21 04:19:18 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.052
[Wed Mar 21 04:19:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.17"
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 21 04:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 21 04:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 04:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 21 04:38:11 2012] fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 21 04:38:11 2012] Fit fullrun_mos2_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 21 04:38:20 2012] Spatial fit model total counts = 48460.500000, observed total counts = 47491.000000
[Wed Mar 21 04:38:20 2012] Offset between fit and detection position for source 1 = 0.004160 pixels
[Wed Mar 21 04:38:20 2012] 48632.100000 total counts/ 12505.800000 bgd. counts: snr = 323.048512
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004160 pixels
  Position = (309.5, 318.9) = 17 46 15.71 -32 14 1.7
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 36126.3 +/- 220.5
  Background counts = 12505.8
  Rate = 0.4 +/- 0.003
[Wed Mar 21 04:38:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 04:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 04:38:20 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 04:38:20 2012] Source does appear to be extended
[Wed Mar 21 04:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 06:24:28 2012] Counts = 36126.300000, rescaling region sizes by 3.000000
[Wed Mar 21 06:24:28 2012] XMMSAS src. selection expression = ellipse(26880.878000, 27695.154200, 931.462227, 931.462227, 0.000000, X, Y)
[Wed Mar 21 06:24:28 2012] Writing source region out to fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 21 06:24:28 2012] Extracting stamp from image fullrun_mos2_xmm0553950201_pi300-10000_cl_sm2.00.img.gz, (256, 265) - (363, 372)
[Wed Mar 21 06:24:28 2012] XMMSAS bgd. selection expression = annulus(26880.878000, 27695.154200, 4657.311134, 9314.622268, X, Y) && !ellipse(27225.569885, 37096.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17142.318207, 28475.685120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.667664, 26856.666840, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 06:24:28 2012] Writing fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1.gif
[Wed Mar 21 06:24:50 2012] Mean detx,y = (108.20, 77.07) 
[Wed Mar 21 06:24:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 06:28:21 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 06:28:21 2012] Setting source spectrum file to fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 06:28:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 21 06:45:46 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:45:46 2012] Error reading totcts from fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 06:45:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:45:46 2012] Using photon index=1.80, rate=0.421, arf fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 06:45:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:45:47 2012] Updating source flux to 4.4e-12
[Wed Mar 21 06:48:26 2012] Reading fit data from xmm0553950201/analysis//spectral/fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar 21 06:48:26 2012] Spectral fit parameter nH value = 2.27824e+22
[Wed Mar 21 06:48:26 2012] Spectral fit parameter PhoIndex value = 1.52666
[Wed Mar 21 06:48:26 2012] Failed to get F(0.3-8.0) from xmm0553950201/analysis//spectral/fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 06:48:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:48:26 2012] Using Nh = 2.3e+22, photon index=1.53, rate=0.421, arf fullrun_mos2_xmm0553950201_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 06:48:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:48:26 2012] Updating source flux to 9.8e-12