[Wed Mar 21 00:46:17 2012] Detection parameters:
  Position = (439.2, 457.6) = 17 45 31.34 -32 3 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 14.8
  Background counts = 45.3
  Rate = 0.0008 +/- 0.0002

[Wed Mar 21 00:46:17 2012] Off-axis axis estimate = 15.41'
[Wed Mar 21 01:25:39 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 01:25:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 01:25:39 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Wed Mar 21 01:25:39 2012] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.996
[Wed Mar 21 01:25:39 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 14.13"
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src17.ximg exists
[Wed Mar 21 02:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src17.csv
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Mar 21 02:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src17.csv
[Wed Mar 21 02:52:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Mar 21 02:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Mar 21 02:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Mar 21 02:52:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 03:38:12 2012] Spatial fit model total counts = 781.118000, observed total counts = 680.000000
[Wed Mar 21 03:38:12 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 21 03:38:12 2012] Source 9 is offset by 5.564910 and 5.987853 pixels which is larger than
2 X fitted extent = 1.517283 x 1.517283, not incorporating fit results
[Wed Mar 21 03:38:12 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 03:38:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 03:38:12 2012] Assessing source extent using major
[Wed Mar 21 03:38:12 2012] Source does appear to be extended
[Wed Mar 21 03:38:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 03:38:12 2012] Deleting source due to low Poisson probability 0.8