[Wed Mar 21 00:46:16 2012] Detection parameters:
  Position = (445.2, 440.3) = 17 45 29.28 -32 5 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.9 +/- 22.3
  Background counts = 48.4
  Rate = 0.003 +/- 0.0003

[Wed Mar 21 00:46:17 2012] Off-axis axis estimate = 14.79'
[Wed Mar 21 01:25:39 2012] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 01:25:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 01:25:39 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Wed Mar 21 01:25:39 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.035
[Wed Mar 21 01:25:39 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.83"
[Wed Mar 21 02:52:50 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Mar 21 02:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src5.csv
[Wed Mar 21 02:52:50 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Mar 21 02:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src5.csv
[Wed Mar 21 02:52:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Mar 21 02:52:51 2012] Fit fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Mar 21 03:38:12 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.328090 pixels away
[Wed Mar 21 03:38:12 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 03:38:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 03:38:12 2012] Assessing source extent using major
[Wed Mar 21 03:38:12 2012] Source does appear to be extended
[Wed Mar 21 03:38:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 03:50:11 2012] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 03:50:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 03:50:11 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Wed Mar 21 03:50:11 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.035
[Wed Mar 21 03:50:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.83"
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Mar 21 04:19:18 2012] Fit fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Mar 21 04:19:18 2012] Fit fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Mar 21 04:38:16 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 18.636424 pixels away
[Wed Mar 21 04:38:16 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 04:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 04:38:16 2012] Assessing source extent using major
[Wed Mar 21 04:38:16 2012] Source does appear to be extended
[Wed Mar 21 04:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 05:46:16 2012] XMMSAS src. selection expression = ellipse(38681.795624, 38253.297791, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 05:46:16 2012] Writing source region out to fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src5_src.reg
[Wed Mar 21 05:46:16 2012] Extracting stamp from image fullrun_mos1_xmm0553950201_pi300-10000_cl_sm2.00.img.gz, (408, 403) - (483, 478)
[Wed Mar 21 05:46:16 2012] XMMSAS bgd. selection expression = annulus(38681.795624, 38253.297791, 1087.500000, 2175.000000, X, Y)
[Wed Mar 21 05:46:16 2012] Writing fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src5.gif
[Wed Mar 21 05:51:37 2012] Mean detx,y = (9895.91, 12292.03) 
[Wed Mar 21 05:51:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:52:01 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:52:01 2012] Setting source spectrum file to fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 21 05:52:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Mar 21 06:22:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 06:22:23 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:45:46 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:45:46 2012] Error reading totcts from fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 21 06:45:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:45:46 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src5.arf
[Wed Mar 21 06:45:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:45:46 2012] Updating source flux to 6.7e-14
[Wed Mar 21 06:45:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting