[Wed Mar 21 00:46:16 2012] Detection parameters:
  Position = (309.7, 318.9) = 17 46 15.63 -32 14 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39969.0 +/- 241.6
  Background counts = 61.4
  Rate = 0.6 +/- 0.004

[Wed Mar 21 00:46:17 2012] Off-axis axis estimate = 1.69'
[Wed Mar 21 01:25:39 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 01:25:39 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Mar 21 01:25:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.636
[Wed Mar 21 01:25:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Mar 21 02:52:50 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 02:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 02:52:50 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 02:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 02:52:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 02:52:51 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 02:52:51 2012] Fit fullrun_mos1_xmm0553950201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 21 03:38:12 2012] Spatial fit model total counts = 35284.100000, observed total counts = 36183.000000
[Wed Mar 21 03:38:12 2012] Offset between fit and detection position for source 2 = 0.167493 pixels
[Wed Mar 21 03:38:12 2012] 35361.400000 total counts/ 8198.900000 bgd. counts: snr = 299.979754
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.167493 pixels
  Position = (309.6, 318.9) = 17 46 15.69 -32 14 1.9
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 27162.5 +/- 188.0
  Background counts = 8198.9
  Rate = 0.3 +/- 0.002
[Wed Mar 21 03:38:12 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 03:38:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 03:38:12 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 03:38:12 2012] Source does appear to be extended
[Wed Mar 21 03:38:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 03:38:12 2012] Source is confused with source 19
[Wed Mar 21 03:50:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 03:50:11 2012] Initial guess for spatial extent in simple fitting = 5.72"
[Wed Mar 21 03:50:11 2012] source mask rpix=1.3, npix_max = 13, mask sum = 8, frac = 0.607
[Wed Mar 21 03:50:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.72"
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 21 04:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 21 04:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src1.csv
[Wed Mar 21 04:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 21 04:19:18 2012] fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 21 04:19:18 2012] Fit fullrun_mos1_xmm0553950201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 21 04:38:16 2012] Spatial fit model total counts = 35346.000000, observed total counts = 36047.000000
[Wed Mar 21 04:38:16 2012] Offset between fit and detection position for source 2 = 0.004490 pixels
[Wed Mar 21 04:38:16 2012] 35506.000000 total counts/ 8487.000000 bgd. counts: snr = 293.286566
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.004490 pixels
  Position = (309.6, 318.9) = 17 46 15.69 -32 14 1.9
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 27019.0 +/- 188.4
  Background counts = 8487.0
  Rate = 0.3 +/- 0.002
[Wed Mar 21 04:38:16 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 04:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 04:38:16 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 04:38:16 2012] Source does appear to be extended
[Wed Mar 21 04:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 05:46:16 2012] Counts = 27019.000000, rescaling region sizes by 3.000000
[Wed Mar 21 05:46:16 2012] XMMSAS src. selection expression = ellipse(26883.867600, 27691.644000, 1022.202029, 1022.202029, 0.000000, X, Y)
[Wed Mar 21 05:46:16 2012] Writing source region out to fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 21 05:46:16 2012] Extracting stamp from image fullrun_mos1_xmm0553950201_pi300-10000_cl_sm2.00.img.gz, (251, 260) - (368, 378)
[Wed Mar 21 05:46:16 2012] XMMSAS bgd. selection expression = annulus(26883.867600, 27691.644000, 5111.010147, 10222.020294, X, Y) && !ellipse(27215.492400, 37099.177800, 445.871213, 445.871213, 0.000000, X, Y) && !ellipse(17144.175400, 28495.905823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.254913, 27181.366302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.033966, 27679.455109, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 05:46:16 2012] Writing fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2.gif
[Wed Mar 21 05:46:37 2012] Mean detx,y = (288.76, -254.43) 
[Wed Mar 21 05:46:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:50:02 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:50:02 2012] Setting source spectrum file to fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 21 05:50:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar 21 06:45:45 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:45:45 2012] Error reading totcts from fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 21 06:45:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:45:46 2012] Using photon index=1.80, rate=0.315, arf fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2.arf
[Wed Mar 21 06:45:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:45:46 2012] Updating source flux to 3.7e-12
[Wed Mar 21 06:45:48 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Mar 21 06:47:17 2012] Reading fit data from xmm0553950201/analysis//spectral/fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2_pl.csv
[Wed Mar 21 06:47:17 2012] Spectral fit parameter nH value = 2.17861e+22
[Wed Mar 21 06:47:17 2012] Spectral fit parameter PhoIndex value = 1.46672
[Wed Mar 21 06:47:17 2012] Failed to get F(0.3-8.0) from xmm0553950201/analysis//spectral/fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 06:47:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:17 2012] Using Nh = 2.2e+22, photon index=1.47, rate=0.315, arf fullrun_mos1_xmm0553950201_pi300-10000_pass1_cl_src2.arf
[Wed Mar 21 06:47:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:17 2012] Updating source flux to 8.3e-12