[Fri May 18 23:03:55 2012] Detection parameters:
  Position = (297.0, 221.0) = 2 14 46.36 -3 56 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4989.1 +/- 87.0
  Background counts = 85.4
  Rate = 0.3 +/- 0.006

[Fri May 18 23:03:56 2012] Off-axis axis estimate = 5.61'
[Fri May 18 23:06:51 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:06:51 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Fri May 18 23:06:51 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.308
[Fri May 18 23:06:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.24"
[Fri May 18 23:45:44 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 23:45:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_src1.csv
[Fri May 18 23:45:44 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 23:45:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_src1.csv
[Fri May 18 23:45:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 23:45:44 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 23:45:44 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 23:45:44 2012] Fit fullrun_pn_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 19 00:30:41 2012] Spatial fit model total counts = 5841.650000, observed total counts = 5845.000000
[Sat May 19 00:30:41 2012] Offset between fit and detection position for source 1 = 0.112381 pixels
[Sat May 19 00:30:41 2012] 5851.750000 total counts/ 1997.460000 bgd. counts: snr = 86.239324
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.112381 pixels
  Position = (297.0, 221.1) = 2 14 46.37 -3 56 29.7
  Extent = 9.8 (9.4-10.0)", rotation angle = 0
  Source counts = 3854.3 +/- 76.5
  Background counts = 1997.5
  Rate = 0.3 +/- 0.006
[Sat May 19 00:30:41 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:30:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:30:41 2012] Assessing source extent using major axis lower bound
[Sat May 19 00:30:41 2012] Source does appear to be extended
[Sat May 19 00:30:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:30:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 00:30:51 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Sat May 19 00:30:51 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.189
[Sat May 19 00:30:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.79"
[Sat May 19 00:57:51 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 00:57:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_src1.csv
[Sat May 19 00:57:51 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 00:57:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_src1.csv
[Sat May 19 00:57:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:57:51 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 00:57:51 2012] fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 00:57:51 2012] Fit fullrun_pn_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 01:36:47 2012] Spatial fit model total counts = 6023.430000, observed total counts = 6024.000000
[Sat May 19 01:36:47 2012] Offset between fit and detection position for source 1 = 0.029033 pixels
[Sat May 19 01:36:47 2012] 6017.340000 total counts/ 2064.640000 bgd. counts: snr = 86.990472
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.029033 pixels
  Position = (297.1, 221.2) = 2 14 46.36 -3 56 29.6
  Extent = 10.0 (9.6-10.3)", rotation angle = 0
  Source counts = 3952.7 +/- 77.6
  Background counts = 2064.6
  Rate = 0.3 +/- 0.006
[Sat May 19 01:36:47 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:36:47 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:36:47 2012] Source does appear to be extended
[Sat May 19 01:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:37:00 2012] Counts = 3952.700000, rescaling region sizes by 2.000000
[Sat May 19 01:37:00 2012] XMMSAS src. selection expression = ellipse(25794.927160, 19192.417000, 1197.727234, 1197.727234, 0.000000, X, Y)
[Sat May 19 01:37:00 2012] Writing source region out to fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1_src.reg
[Sat May 19 01:37:00 2012] Extracting stamp from image fullrun_pn_xmm0553911701_pi300-10000_cl_sm2.00.img.gz, (228, 152) - (366, 290)
[Sat May 19 01:37:00 2012] XMMSAS bgd. selection expression = annulus(25794.927160, 19192.417000, 3992.424115, 7984.848230, X, Y) && !ellipse(29434.833038, 19902.121597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33309.128784, 25550.647308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.105347, 17963.387344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.166321, 22375.295990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19605.513672, 18059.119736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.710785, 19158.964294, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 01:37:00 2012] Writing fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1.gif
[Sat May 19 01:37:09 2012] Mean detx,y = (1727.64, 7606.47) 
[Sat May 19 01:37:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:39:34 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:39:35 2012] Setting source spectrum file to fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 01:39:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 19 02:43:55 2012] Updating aperture counts using extracted products
[Sat May 19 02:43:55 2012] Error reading totcts from fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 02:43:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 02:43:55 2012] Using photon index=1.80, rate=0.289, arf fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1.arf
[Sat May 19 02:43:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 02:43:55 2012] Updating source flux to 9.3e-13
[Sat May 19 02:45:01 2012] Reading fit data from xmm0553911701/analysis//spectral/fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1_pl.csv
[Sat May 19 02:45:01 2012] Spectral fit parameter nH value = 2.83252e+21
[Sat May 19 02:45:01 2012] Spectral fit parameter PhoIndex value = 3.52684
[Sat May 19 02:45:01 2012] Failed to get F(0.3-8.0) from xmm0553911701/analysis//spectral/fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May 19 02:45:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 02:45:01 2012] Using Nh = 2.8e+21, photon index=3.53, rate=0.289, arf fullrun_pn_xmm0553911701_pi300-10000_pass1_cl_src1.arf
[Sat May 19 02:45:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 02:45:01 2012] Updating source flux to 6.9e-13