[Fri May 18 23:04:38 2012] Detection parameters: Position = (297.4, 222.7) = 2 14 46.27 -3 56 29.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1597.1 +/- 56.6 Background counts = 48.9 Rate = 0.1 +/- 0.004 [Fri May 18 23:04:38 2012] Off-axis axis estimate = 5.49' [Sat May 19 00:04:48 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting [Sat May 19 00:04:48 2012] Initial guess for spatial extent in simple fitting = 9.18" [Sat May 19 00:04:48 2012] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.587 [Sat May 19 00:04:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.18" [Sat May 19 00:30:36 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_src1.ximg exists [Sat May 19 00:30:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_src1.csv [Sat May 19 00:30:36 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_src1_1.ximg exists [Sat May 19 00:30:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_src1.csv [Sat May 19 00:30:36 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 19 00:30:36 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat May 19 00:30:36 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat May 19 00:30:36 2012] Fit fullrun_mos2_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat May 19 00:30:45 2012] Spatial fit model total counts = 2253.430000, observed total counts = 2352.000000 [Sat May 19 00:30:45 2012] Offset between fit and detection position for source 1 = 1.792708 pixels [Sat May 19 00:30:45 2012] 2241.900000 total counts/ 556.760000 bgd. counts: snr = 71.417061 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.792708 pixels Position = (297.5, 220.9) = 2 14 46.24 -3 56 30.8 Extent = 12.9 (12.1-13.3)", rotation angle = 0 Source counts = 1685.1 +/- 47.3 Background counts = 556.8 Rate = 0.08 +/- 0.002 [Sat May 19 00:30:45 2012] Spatial fit model total counts = 2194.970000, observed total counts = 2281.000000 [Sat May 19 00:30:45 2012] Offset between fit and detection position for source 1 = 0.195790 pixels [Sat May 19 00:30:45 2012] Warning, changing simple spatial fit ID from 1 to 3 [Sat May 19 00:30:45 2012] 2209.840000 total counts/ 766.000000 bgd. counts: snr = 52.168060 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.195790 pixels Position = (297.4, 220.7) = 2 14 46.27 -3 56 31.6 Extent = 11.7 (10.5-12.7)", rotation angle = 0 Source counts = 1443.8 +/- 47.0 Background counts = 766.0 Rate = 0.07 +/- 0.002 [Sat May 19 00:30:45 2012] Vigneting correction estimate = 1.000000 [Sat May 19 00:30:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 19 00:30:45 2012] Assessing source extent using major axis lower bound [Sat May 19 00:30:45 2012] Source does appear to be extended [Sat May 19 00:30:45 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 19 00:30:45 2012] Source is confused with source 5 [Sat May 19 01:14:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 19 01:14:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat May 19 01:14:38 2012] Initial guess for spatial extent in simple fitting = 11.71" [Sat May 19 01:14:38 2012] source mask rpix=2.7, npix_max = 40, mask sum = 28, frac = 0.687 [Sat May 19 01:14:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.71" [Sat May 19 01:36:42 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_src1.ximg exists [Sat May 19 01:36:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_src1.csv [Sat May 19 01:36:42 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_src1_1.ximg exists [Sat May 19 01:36:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_src1.csv [Sat May 19 01:36:42 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 19 01:36:42 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat May 19 01:36:42 2012] fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat May 19 01:36:42 2012] Fit fullrun_mos2_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat May 19 01:36:52 2012] Warning, spatial fit 1 centroid is now closest to src. 5 [Sat May 19 01:36:52 2012] Spatial fit model total counts = 2200.730000, observed total counts = 2281.000000 [Sat May 19 01:36:52 2012] Offset between fit and detection position for source 1 = 0.022045 pixels [Sat May 19 01:36:52 2012] Warning, changing simple spatial fit ID from 1 to 3 [Sat May 19 01:36:52 2012] 2219.620000 total counts/ 774.980000 bgd. counts: snr = 51.893670 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.022045 pixels Position = (297.4, 220.7) = 2 14 46.26 -3 56 31.7 Extent = 11.7 (10.6-12.7)", rotation angle = 0 Source counts = 1444.6 +/- 47.1 Background counts = 775.0 Rate = 0.07 +/- 0.002 [Sat May 19 01:36:52 2012] Vigneting correction estimate = 1.000000 [Sat May 19 01:36:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 19 01:36:52 2012] Assessing source extent using major axis lower bound [Sat May 19 01:36:52 2012] Source does appear to be extended [Sat May 19 01:36:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 19 02:26:03 2012] Counts = 1444.640000, rescaling region sizes by 2.000000 [Sat May 19 02:26:03 2012] XMMSAS src. selection expression = ellipse(25824.770200, 19150.448600, 1403.220040, 1403.220040, 0.000000, X, Y) [Sat May 19 02:26:03 2012] Writing source region out to fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1_src.reg [Sat May 19 02:26:03 2012] Extracting stamp from image fullrun_mos2_xmm0553911701_pi300-10000_cl_sm2.00.img.gz, (217, 140) - (378, 301) [Sat May 19 02:26:03 2012] XMMSAS bgd. selection expression = annulus(25824.770200, 19150.448600, 4677.400135, 9354.800269, X, Y) && !ellipse(35869.716034, 17694.016037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.090881, 18948.696594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.362549, 19864.356461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22271.008800, 28772.340600, 377.168011, 377.168011, 0.000000, X, Y) && !ellipse(35894.625519, 23943.512939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33288.890260, 25368.284400, 407.384812, 262.520008, 71.313548, X, Y) && !ellipse(19631.098680, 18065.774200, 561.131216, 561.131216, 0.000000, X, Y) && !ellipse(32602.537872, 17568.045517, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 19 02:26:03 2012] Writing fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1.gif [Sat May 19 02:26:06 2012] Mean detx,y = (-1678.76, -7775.73) [Sat May 19 02:26:08 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 19 02:28:17 2012] Binned source spectrum to 10 counts/bin [Sat May 19 02:28:17 2012] Setting source spectrum file to fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat May 19 02:28:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat May 19 02:43:56 2012] Updating aperture counts using extracted products [Sat May 19 02:43:56 2012] Error reading totcts from fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat May 19 02:43:57 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 19 02:43:57 2012] Using photon index=1.80, rate=0.0723, arf fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1.arf [Sat May 19 02:43:57 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 19 02:43:57 2012] Updating source flux to 9.8e-13 [Sat May 19 02:44:26 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Sat May 19 02:44:43 2012] Reading fit data from xmm0553911701/analysis//spectral/fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1_pl.csv [Sat May 19 02:44:43 2012] Spectral fit parameter nH value = 3.36495e+21 [Sat May 19 02:44:43 2012] Spectral fit parameter PhoIndex value = 3.7369 [Sat May 19 02:44:43 2012] Failed to get F(0.3-8.0) from xmm0553911701/analysis//spectral/fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat May 19 02:44:43 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 19 02:44:43 2012] Using Nh = 3.4e+21, photon index=3.74, rate=0.0723, arf fullrun_mos2_xmm0553911701_pi300-10000_pass1_cl_src1.arf [Sat May 19 02:44:43 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 19 02:44:43 2012] Updating source flux to 6.8e-13