[Fri May 18 23:04:16 2012] Detection parameters:
  Position = (339.0, 229.9) = 2 14 34.18 -3 55 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 318.0 +/- 24.9
  Background counts = 50.4
  Rate = 0.02 +/- 0.002

[Fri May 18 23:04:17 2012] Off-axis axis estimate = 5.77'
[Fri May 18 23:45:44 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:45:44 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri May 18 23:45:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.860
[Fri May 18 23:45:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.31"
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 19 00:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src3.csv
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 19 00:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src3.csv
[Sat May 19 00:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 19 00:04:48 2012] Fit fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May 19 00:30:43 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.404611 pixels away
[Sat May 19 00:30:43 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:30:43 2012] Assessing source extent using major
[Sat May 19 00:30:43 2012] Source does appear to be extended
[Sat May 19 00:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:57:51 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:57:51 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Sat May 19 00:57:51 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.860
[Sat May 19 00:57:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.31"
[Sat May 19 01:14:37 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 19 01:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src3.csv
[Sat May 19 01:14:37 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 19 01:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src3.csv
[Sat May 19 01:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:14:38 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 19 01:14:38 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 19 01:14:38 2012] Fit fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat May 19 01:36:49 2012] Spatial fit model total counts = 344.458000, observed total counts = 354.000000
[Sat May 19 01:36:49 2012] Offset between fit and detection position for source 14 = 1.022057 pixels
[Sat May 19 01:36:49 2012] 344.325000 total counts/ 210.433000 bgd. counts: snr = 9.229915
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.022057 pixels
  Position = (339.3, 228.9) = 2 14 34.09 -3 55 55.7
  Extent = 6.8 (5.6-8.2)", rotation angle = 0
  Source counts = 133.9 +/- 18.6
  Background counts = 210.4
  Rate = 0.007 +/- 0.0009
[Sat May 19 01:36:49 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:36:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:36:49 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:36:49 2012] Source does appear to be extended
[Sat May 19 01:36:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 02:03:10 2012] XMMSAS src. selection expression = ellipse(29467.384800, 19869.439800, 409.992012, 409.992012, 0.000000, X, Y)
[Sat May 19 02:03:10 2012] Writing source region out to fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src14_src.reg
[Sat May 19 02:03:10 2012] Extracting stamp from image fullrun_mos1_xmm0553911701_pi300-10000_cl_sm2.00.img.gz, (316, 205) - (363, 253)
[Sat May 19 02:03:10 2012] XMMSAS bgd. selection expression = annulus(29467.384800, 19869.439800, 683.320020, 1366.640039, X, Y) && !ellipse(28316.298401, 20657.501328, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 02:03:10 2012] Writing fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src14.gif
[Sat May 19 02:03:42 2012] Mean detx,y = (-5313.39, 4443.79) 
[Sat May 19 02:03:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 02:03:51 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 02:03:51 2012] Setting source spectrum file to fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat May 19 02:03:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat May 19 02:43:56 2012] Updating aperture counts using extracted products
[Sat May 19 02:43:56 2012] Error reading totcts from fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat May 19 02:43:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 02:43:56 2012] Using photon index=1.80, rate=0.00673, arf fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src14.arf
[Sat May 19 02:43:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 02:43:56 2012] Updating source flux to 1e-13