[Fri May 18 23:04:16 2012] Detection parameters:
  Position = (513.3, 315.5) = 2 13 43.50 -3 49 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.0 +/- 13.2
  Background counts = 37.1
  Rate = 0.002 +/- 0.0005

[Fri May 18 23:04:17 2012] Off-axis axis estimate = 15.63'
[Fri May 18 23:45:44 2012] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:45:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 23:45:44 2012] Initial guess for spatial extent in simple fitting = 14.24"
[Fri May 18 23:45:44 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.860
[Fri May 18 23:45:44 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 14.24"
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src16.ximg exists
[Sat May 19 00:04:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src16.csv
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat May 19 00:04:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src16.csv
[Sat May 19 00:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat May 19 00:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat May 19 00:04:48 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat May 19 00:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat May 19 00:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911701_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:30:43 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 19.095514 pixels away
[Sat May 19 00:30:43 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:30:43 2012] Assessing source extent using major
[Sat May 19 00:30:43 2012] Source does appear to be extended
[Sat May 19 00:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:57:51 2012] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:57:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 00:57:51 2012] Initial guess for spatial extent in simple fitting = 14.24"
[Sat May 19 00:57:51 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.860
[Sat May 19 00:57:51 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 14.24"
[Sat May 19 01:14:38 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src14.ximg exists
[Sat May 19 01:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src14.csv
[Sat May 19 01:14:38 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat May 19 01:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src14.csv
[Sat May 19 01:14:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:14:38 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat May 19 01:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May 19 01:14:38 2012] fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat May 19 01:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May 19 01:14:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911701_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:36:49 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.948088 pixels away
[Sat May 19 01:36:49 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:36:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:36:49 2012] Assessing source extent using major
[Sat May 19 01:36:49 2012] Source does appear to be extended
[Sat May 19 01:36:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 02:03:10 2012] XMMSAS src. selection expression = ellipse(44610.176025, 27400.586761, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 02:03:10 2012] Writing source region out to fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src10_src.reg
[Sat May 19 02:03:10 2012] Extracting stamp from image fullrun_mos1_xmm0553911701_pi300-10000_cl_sm2.00.img.gz, (476, 278) - (551, 353)
[Sat May 19 02:03:10 2012] XMMSAS bgd. selection expression = annulus(44610.176025, 27400.586761, 1087.500000, 2175.000000, X, Y)
[Sat May 19 02:03:10 2012] Writing fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src10.gif
[Sat May 19 02:06:50 2012] Mean detx,y = (7986.86, 14706.69) 
[Sat May 19 02:06:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 02:07:07 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 02:07:07 2012] Setting source spectrum file to fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat May 19 02:07:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat May 19 02:25:54 2012] Not generating rmf since there are only 57 counts
[Sat May 19 02:25:54 2012] rmf not generated due to insufficient counts
[Sat May 19 02:43:56 2012] Updating aperture counts using extracted products
[Sat May 19 02:43:56 2012] Error reading totcts from fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat May 19 02:43:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 02:43:56 2012] Using photon index=1.80, rate=0.00228, arf fullrun_mos1_xmm0553911701_pi300-10000_pass1_cl_src10.arf
[Sat May 19 02:43:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 02:43:56 2012] Updating source flux to 6.9e-14
[Sat May 19 02:43:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting