[Mon Aug 27 09:45:46 2012] Detection parameters:
  Position = (351.7, 345.1) = 2 18 30.26 -4 22 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 9.4
  Background counts = 12.6
  Rate = 0.005 +/- 0.001

[Mon Aug 27 09:45:46 2012] Off-axis axis estimate = 5.13'
[Mon Aug 27 09:47:04 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 09:47:04 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Mon Aug 27 09:47:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.138
[Mon Aug 27 09:47:04 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.99"
[Mon Aug 27 10:31:59 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_src23.ximg exists
[Mon Aug 27 10:31:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_src23.csv
[Mon Aug 27 10:31:59 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Aug 27 10:31:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_src23.csv
[Mon Aug 27 10:31:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 10:32:00 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Aug 27 10:32:00 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Aug 27 10:32:00 2012] Fit fullrun_pn_xmm0553911501_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Aug 27 11:17:12 2012] Spatial fit model total counts = 194.516000, observed total counts = 179.000000
[Mon Aug 27 11:17:12 2012] Offset between fit and detection position for source 23 = 1.294794 pixels
[Mon Aug 27 11:17:12 2012] 192.216900 total counts/ 98.336400 bgd. counts: snr = 9.467128
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.294794 pixels
  Position = (351.4, 346.3) = 2 18 30.36 -4 22 26.0
  Extent = 18.0 (18.0-18.0)", rotation angle = 0
  Source counts = 93.9 +/- 13.9
  Background counts = 98.3
  Rate = 0.008 +/- 0.001
[Mon Aug 27 11:17:12 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 11:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 11:17:12 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 11:17:12 2012] Source does appear to be extended
[Mon Aug 27 11:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 11:17:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 11:17:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 11:17:24 2012] Initial guess for spatial extent in simple fitting = 17.98"
[Mon Aug 27 11:17:24 2012] source mask rpix=4.1, npix_max = 85, mask sum = 80, frac = 0.932
[Mon Aug 27 11:17:24 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 17.98"
[Mon Aug 27 12:03:40 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_src22.ximg exists
[Mon Aug 27 12:03:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_src22.csv
[Mon Aug 27 12:03:40 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Aug 27 12:03:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_src22.csv
[Mon Aug 27 12:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 12:03:40 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Aug 27 12:03:40 2012] fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Aug 27 12:03:40 2012] Fit fullrun_pn_xmm0553911501_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Aug 27 12:35:54 2012] Spatial fit model total counts = 374.438000, observed total counts = 340.000000
[Mon Aug 27 12:35:54 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 27 12:35:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 12:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 12:35:54 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 12:35:54 2012] Source does appear to be extended
[Mon Aug 27 12:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 12:36:06 2012] XMMSAS src. selection expression = ellipse(30520.248600, 30080.209600, 1078.752031, 1078.752031, 0.000000, X, Y)
[Mon Aug 27 12:36:06 2012] Writing source region out to fullrun_pn_xmm0553911501_pi300-10000_pass1_cl_src23_src.reg
[Mon Aug 27 12:36:06 2012] Extracting stamp from image fullrun_pn_xmm0553911501_pi300-10000_cl_sm2.00.img.gz, (289, 284) - (413, 408)
[Mon Aug 27 12:36:06 2012] XMMSAS bgd. selection expression = annulus(30520.248600, 30080.209600, 1797.920052, 3595.840103, X, Y) && !ellipse(27978.427338, 32126.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32009.820800, 29927.875600, 440.416813, 440.416813, 0.000000, X, Y)
[Mon Aug 27 12:36:06 2012] Writing fullrun_pn_xmm0553911501_pi300-10000_pass1_cl_src23.gif
[Mon Aug 27 12:47:15 2012] Mean detx,y = (1337.85, -4252.54) 
[Mon Aug 27 12:47:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 12:47:49 2012] grppha failed
[Mon Aug 27 12:47:50 2012] Setting source spectrum file to fullrun_pn_xmm0553911501_pi300-10000_pass1_cl_src23_src.pi.gz
[Mon Aug 27 12:47:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553911501_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Aug 27 12:53:30 2012] Not generating rmf since there are only 93 counts
[Mon Aug 27 12:53:30 2012] rmf not generated due to insufficient counts
[Mon Aug 27 12:58:59 2012] Updating aperture counts using extracted products
[Mon Aug 27 12:58:59 2012] Error reading totcts from fullrun_pn_xmm0553911501_pi300-10000_pass1_cl_src23_src.pi.gz
[Mon Aug 27 12:59:00 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 12:59:03 2012] Flag p found in src. 23 procflags, skipping spectral fitting
[Mon Aug 27 12:59:03 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 12:59:04 2012] xmm0553911501/analysis//spectral/fullrun_pn_xmm0553911501_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete