[Sat Mar 17 23:54:50 2012] Detection parameters:
  Position = (232.9, 221.1) = 2 14 53.05 -4 34 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 634.2 +/- 32.4
  Background counts = 67.3
  Rate = 0.04 +/- 0.002

[Sat Mar 17 23:54:51 2012] Off-axis axis estimate = 7.35'
[Sat Mar 17 23:58:06 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 23:58:06 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Sat Mar 17 23:58:06 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.129
[Sat Mar 17 23:58:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.10"
[Sun Mar 18 01:35:59 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 01:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 01:35:59 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 01:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 01:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 01:36:00 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 01:36:00 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 01:36:00 2012] Fit fullrun_pn_xmm0553911401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 03:23:49 2012] Spatial fit model total counts = 1510.430000, observed total counts = 1378.000000
[Sun Mar 18 03:23:49 2012] Offset between fit and detection position for source 3 = 0.085161 pixels
[Sun Mar 18 03:23:49 2012] 1523.893000 total counts/ 1041.540000 bgd. counts: snr = 14.946070
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.085161 pixels
  Position = (232.8, 221.2) = 2 14 53.07 -4 34 41.2
  Extent = 6.0 (5.4-6.6)", rotation angle = 0
  Source counts = 482.4 +/- 39.0
  Background counts = 1041.5
  Rate = 0.02 +/- 0.002
[Sun Mar 18 03:23:49 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 03:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 03:23:49 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 03:23:49 2012] Source does appear to be extended
[Sun Mar 18 03:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 03:24:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 03:24:06 2012] Initial guess for spatial extent in simple fitting = 5.98"
[Sun Mar 18 03:24:06 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.139
[Sun Mar 18 03:24:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.98"
[Sun Mar 18 04:44:31 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 04:44:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 04:44:31 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 04:44:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 04:44:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 04:44:31 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 04:44:31 2012] fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 04:44:31 2012] Fit fullrun_pn_xmm0553911401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 06:01:19 2012] Spatial fit model total counts = 1226.990000, observed total counts = 1137.000000
[Sun Mar 18 06:01:19 2012] Offset between fit and detection position for source 3 = 0.010297 pixels
[Sun Mar 18 06:01:19 2012] 1240.355000 total counts/ 757.902000 bgd. counts: snr = 17.524615
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.010297 pixels
  Position = (232.8, 221.2) = 2 14 53.07 -4 34 41.2
  Extent = 6.0 (5.4-6.6)", rotation angle = 0
  Source counts = 482.5 +/- 35.2
  Background counts = 757.9
  Rate = 0.02 +/- 0.001
[Sun Mar 18 06:01:19 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 06:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 06:01:19 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 06:01:19 2012] Source does appear to be extended
[Sun Mar 18 06:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 06:01:35 2012] XMMSAS src. selection expression = ellipse(20206.983200, 19192.652200, 360.405610, 360.405610, 0.000000, X, Y)
[Sun Mar 18 06:01:35 2012] Writing source region out to fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar 18 06:01:35 2012] Extracting stamp from image fullrun_pn_xmm0553911401_pi300-10000_cl_sm2.00.img.gz, (212, 200) - (254, 242)
[Sun Mar 18 06:01:35 2012] XMMSAS bgd. selection expression = annulus(20206.983200, 19192.652200, 600.676017, 1201.352035, X, Y) && !ellipse(23006.421200, 19370.322000, 1860.616054, 1062.064031, 302.872701, X, Y)
[Sun Mar 18 06:01:35 2012] Writing fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3.gif
[Sun Mar 18 06:03:09 2012] Mean detx,y = (1234.33, -7043.52) 
[Sun Mar 18 06:03:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 06:03:24 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 06:03:25 2012] Setting source spectrum file to fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 18 06:03:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar 18 07:19:27 2012] Updating aperture counts using extracted products
[Sun Mar 18 07:19:27 2012] Error reading totcts from fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 18 07:19:29 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 07:19:29 2012] Using photon index=1.80, rate=0.0194, arf fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3.arf
[Sun Mar 18 07:19:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 07:19:29 2012] Updating source flux to 7.8e-14
[Sun Mar 18 07:22:00 2012] Reading fit data from xmm0553911401/analysis//spectral/fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3_pl.csv
[Sun Mar 18 07:22:00 2012] Spectral fit parameter nH value = 1.08421e+22
[Sun Mar 18 07:22:00 2012] Spectral fit parameter PhoIndex value = 9.9544
[Sun Mar 18 07:22:00 2012] Failed to get F(0.3-8.0) from xmm0553911401/analysis//spectral/fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 07:22:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 07:22:00 2012] Using Nh = 1.1e+22, photon index=9.95, rate=0.0194, arf fullrun_pn_xmm0553911401_pi300-10000_pass1_cl_src3.arf
[Sun Mar 18 07:22:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 07:22:00 2012] Updating source flux to 4.3e-14