[Sat Mar 17 23:55:46 2012] Detection parameters:
  Position = (271.3, 242.4) = 2 14 41.88 -4 33 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.3 +/- 14.4
  Background counts = 43.8
  Rate = 0.003 +/- 0.0007

[Sat Mar 17 23:55:47 2012] Off-axis axis estimate = 4.52'
[Sun Mar 18 02:18:03 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 02:18:03 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Mar 18 02:18:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.003
[Sun Mar 18 02:18:03 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.69"
[Sun Mar 18 03:23:41 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_src9.ximg exists
[Sun Mar 18 03:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_src9.csv
[Sun Mar 18 03:23:41 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Mar 18 03:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_src9.csv
[Sun Mar 18 03:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 03:23:41 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Mar 18 03:23:41 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Mar 18 03:23:41 2012] Fit fullrun_mos2_xmm0553911401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Mar 18 03:23:57 2012] Warning, spatial fit 9 centroid is now closest to src. 25
[Sun Mar 18 03:23:57 2012] Source 9 is offset by 8.607305 and 2.052088 pixels which is larger than
2 X fitted extent = 1.041894 x 1.041894, not incorporating fit results
[Sun Mar 18 03:23:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 03:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 03:23:57 2012] Assessing source extent using major
[Sun Mar 18 03:23:57 2012] Source does appear to be extended
[Sun Mar 18 03:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 03:23:57 2012] Source is confused with source 10
[Sun Mar 18 05:22:32 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 05:22:32 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Mar 18 05:22:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.003
[Sun Mar 18 05:22:32 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.69"
[Sun Mar 18 06:01:12 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_src9.ximg exists
[Sun Mar 18 06:01:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_src9.csv
[Sun Mar 18 06:01:12 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Mar 18 06:01:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_src9.csv
[Sun Mar 18 06:01:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 06:01:12 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Mar 18 06:01:12 2012] fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Mar 18 06:01:12 2012] Fit fullrun_mos2_xmm0553911401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Mar 18 06:01:26 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.072904 pixels away
[Sun Mar 18 06:01:26 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.886145 pixels away
[Sun Mar 18 06:01:26 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 06:01:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 06:01:26 2012] Assessing source extent using major
[Sun Mar 18 06:01:26 2012] Source does appear to be extended
[Sun Mar 18 06:01:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 07:02:24 2012] XMMSAS src. selection expression = ellipse(23552.177551, 21039.189667, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 07:02:24 2012] Writing source region out to fullrun_mos2_xmm0553911401_pi300-10000_pass1_cl_src9_src.reg
[Sun Mar 18 07:02:24 2012] Extracting stamp from image fullrun_mos2_xmm0553911401_pi300-10000_cl_sm2.00.img.gz, (234, 205) - (309, 280)
[Sun Mar 18 07:02:24 2012] XMMSAS bgd. selection expression = annulus(23552.177551, 21039.189667, 1087.500000, 2175.000000, X, Y) && !ellipse(23620.116000, 19922.737200, 1455.136042, 1455.136042, 0.000000, X, Y) && !ellipse(24352.732000, 20721.426400, 1385.744040, 1385.744040, 0.000000, X, Y) && !ellipse(24049.538879, 20204.906448, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 07:02:24 2012] Writing fullrun_mos2_xmm0553911401_pi300-10000_pass1_cl_src9.gif
[Sun Mar 18 07:05:22 2012] Mean detx,y = (1201.45, 3788.72) 
[Sun Mar 18 07:05:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 07:05:42 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 07:05:42 2012] Setting source spectrum file to fullrun_mos2_xmm0553911401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Mar 18 07:05:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553911401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Mar 18 07:13:32 2012] Not generating rmf since there are only 73 counts
[Sun Mar 18 07:13:32 2012] rmf not generated due to insufficient counts
[Sun Mar 18 07:19:33 2012] Updating aperture counts using extracted products
[Sun Mar 18 07:19:33 2012] Error reading totcts from fullrun_mos2_xmm0553911401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Mar 18 07:19:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 07:19:34 2012] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0553911401_pi300-10000_pass1_cl_src9.arf
[Sun Mar 18 07:19:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 07:19:34 2012] Updating source flux to 4.2e-14
[Sun Mar 18 07:19:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting