[Fri Dec  2 07:20:04 2011] Detection parameters:
  Position = (404.2, 274.4) = 2 17 24.06 -5 35 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 12.3
  Background counts = 22.7
  Rate = 0.006 +/- 0.001

[Fri Dec  2 07:20:04 2011] Off-axis axis estimate = 7.86'
[Fri Dec  2 07:21:45 2011] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 07:21:45 2011] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Dec  2 07:21:45 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Fri Dec  2 07:21:45 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 10.36"
[Fri Dec  2 07:53:50 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_src16.ximg exists
[Fri Dec  2 07:53:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_src16.csv
[Fri Dec  2 07:53:50 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Dec  2 07:53:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_src16.csv
[Fri Dec  2 07:53:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 07:53:51 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Dec  2 07:53:51 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Dec  2 07:53:51 2011] Fit fullrun_pn_xmm0553911301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Dec  2 08:34:48 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.822275 pixels away
[Fri Dec  2 08:34:48 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 08:34:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 08:34:48 2011] Assessing source extent using major
[Fri Dec  2 08:34:48 2011] Source does appear to be extended
[Fri Dec  2 08:34:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 08:35:01 2011] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 08:35:01 2011] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Dec  2 08:35:01 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Fri Dec  2 08:35:01 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 10.36"
[Fri Dec  2 09:09:43 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_src16.ximg exists
[Fri Dec  2 09:09:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_src16.csv
[Fri Dec  2 09:09:43 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Dec  2 09:09:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_src16.csv
[Fri Dec  2 09:09:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 09:09:43 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Dec  2 09:09:43 2011] fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Dec  2 09:09:43 2011] Fit fullrun_pn_xmm0553911301_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Dec  2 09:43:41 2011] Spatial fit model total counts = 257.976000, observed total counts = 258.000000
[Fri Dec  2 09:43:41 2011] Offset between fit and detection position for source 16 = 0.284754 pixels
[Fri Dec  2 09:43:41 2011] 256.536000 total counts/ 214.552000 bgd. counts: snr = 2.866273
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.284754 pixels
  Position = (404.2, 274.6) = 2 17 24.07 -5 35 32.3
  Extent = 4.3 (3.2-6.1)", rotation angle = 0
  Source counts = 42.0 +/- 16.0
  Background counts = 214.6
  Rate = 0.004 +/- 0.001
[Fri Dec  2 09:43:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 09:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 09:43:41 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 09:43:41 2011] Source does appear to be extended
[Fri Dec  2 09:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 09:43:52 2011] XMMSAS src. selection expression = ellipse(35115.872420, 23845.383600, 255.635407, 255.635407, 0.000000, X, Y)
[Fri Dec  2 09:43:52 2011] Writing source region out to fullrun_pn_xmm0553911301_pi300-10000_pass1_cl_src16_src.reg
[Fri Dec  2 09:43:52 2011] Extracting stamp from image fullrun_pn_xmm0553911301_pi300-10000_cl_sm2.00.img.gz, (389, 260) - (419, 289)
[Fri Dec  2 09:43:52 2011] XMMSAS bgd. selection expression = annulus(35115.872420, 23845.383600, 426.059012, 852.118025, X, Y)
[Fri Dec  2 09:43:52 2011] Writing fullrun_pn_xmm0553911301_pi300-10000_pass1_cl_src16.gif
[Fri Dec  2 09:50:56 2011] Mean detx,y = (-10477.62, 1685.52) 
[Fri Dec  2 09:50:58 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec  2 09:51:10 2011] Binned source spectrum to 10 counts/bin
[Fri Dec  2 09:51:10 2011] Setting source spectrum file to fullrun_pn_xmm0553911301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Dec  2 09:51:10 2011] Setting bgd. spectrum file to fullrun_pn_xmm0553911301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Dec  2 09:59:04 2011] Not generating rmf since there are only 41 counts
[Fri Dec  2 09:59:04 2011] rmf not generated due to insufficient counts
[Fri Dec  2 10:16:29 2011] Updating aperture counts using extracted products
[Fri Dec  2 10:16:29 2011] Error reading totcts from fullrun_pn_xmm0553911301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Dec  2 10:16:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 10:16:29 2011] Using photon index=1.80, rate=0.0037, arf fullrun_pn_xmm0553911301_pi300-10000_pass1_cl_src16.arf
[Fri Dec  2 10:16:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 10:16:29 2011] Updating source flux to 2.5e-14
[Fri Dec  2 10:16:45 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting