[Fri Dec  2 07:20:22 2011] Detection parameters:
  Position = (162.6, 407.6) = 2 18 34.44 -5 25 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.7 +/- 8.5
  Background counts = 7.3
  Rate = 0.003 +/- 0.0006

[Fri Dec  2 07:20:22 2011] Off-axis axis estimate = 12.64'
[Fri Dec  2 07:53:51 2011] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 07:53:51 2011] Initial guess for spatial extent in simple fitting = 12.75"
[Fri Dec  2 07:53:51 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.041
[Fri Dec  2 07:53:51 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 12.75"
[Fri Dec  2 08:10:01 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec  2 08:10:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_src7.csv
[Fri Dec  2 08:10:01 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec  2 08:10:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_src7.csv
[Fri Dec  2 08:10:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 08:10:01 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec  2 08:10:01 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec  2 08:10:01 2011] Fit fullrun_mos1_xmm0553911301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec  2 08:34:51 2011] Spatial fit model total counts = 103.000000, observed total counts = 103.000000
[Fri Dec  2 08:34:51 2011] Offset between fit and detection position for source 4 = 0.321927 pixels
[Fri Dec  2 08:34:51 2011] 102.624700 total counts/ 65.690200 bgd. counts: snr = 4.557030
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.321927 pixels
  Position = (162.7, 407.3) = 2 18 34.41 -5 25 55.0
  Extent = 8.8 (4.6-13.0)", rotation angle = 0
  Source counts = 36.9 +/- 10.1
  Background counts = 65.7
  Rate = 0.003 +/- 0.0008
[Fri Dec  2 08:34:51 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 08:34:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 08:34:51 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 08:34:51 2011] Source does appear to be extended
[Fri Dec  2 08:34:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 09:09:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec  2 09:09:43 2011] Initial guess for spatial extent in simple fitting = 8.77"
[Fri Dec  2 09:09:43 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Fri Dec  2 09:09:43 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 8.77"
[Fri Dec  2 09:20:59 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Dec  2 09:20:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_src6.csv
[Fri Dec  2 09:20:59 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Dec  2 09:20:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_src6.csv
[Fri Dec  2 09:20:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 09:20:59 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Dec  2 09:20:59 2011] fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Dec  2 09:20:59 2011] Fit fullrun_mos1_xmm0553911301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Dec  2 09:43:43 2011] Spatial fit model total counts = 89.999200, observed total counts = 90.000000
[Fri Dec  2 09:43:43 2011] Offset between fit and detection position for source 4 = 0.076195 pixels
[Fri Dec  2 09:43:43 2011] 89.492400 total counts/ 52.931400 bgd. counts: snr = 5.025293
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.076195 pixels
  Position = (162.8, 407.3) = 2 18 34.39 -5 25 55.1
  Extent = 8.6 (4.4-14.0)", rotation angle = 0
  Source counts = 36.6 +/- 9.5
  Background counts = 52.9
  Rate = 0.003 +/- 0.0007
[Fri Dec  2 09:43:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 09:43:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 09:43:43 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 09:43:43 2011] Source does appear to be extended
[Fri Dec  2 09:43:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 10:02:36 2011] XMMSAS src. selection expression = ellipse(14114.462400, 35388.321000, 517.658415, 517.658415, 0.000000, X, Y)
[Fri Dec  2 10:02:36 2011] Writing source region out to fullrun_mos1_xmm0553911301_pi300-10000_pass1_cl_src4_src.reg
[Fri Dec  2 10:02:36 2011] Extracting stamp from image fullrun_mos1_xmm0553911301_pi300-10000_cl_sm2.00.img.gz, (133, 378) - (193, 437)
[Fri Dec  2 10:02:36 2011] XMMSAS bgd. selection expression = annulus(14114.462400, 35388.321000, 862.764025, 1725.528050, X, Y)
[Fri Dec  2 10:02:36 2011] Writing fullrun_mos1_xmm0553911301_pi300-10000_pass1_cl_src4.gif
[Fri Dec  2 10:03:30 2011] Mean detx,y = (-7672.18, 12422.28) 
[Fri Dec  2 10:03:31 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec  2 10:03:38 2011] Binned source spectrum to 10 counts/bin
[Fri Dec  2 10:03:38 2011] Setting source spectrum file to fullrun_mos1_xmm0553911301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Dec  2 10:03:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0553911301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Dec  2 10:08:19 2011] Not generating rmf since there are only 36 counts
[Fri Dec  2 10:08:19 2011] rmf not generated due to insufficient counts
[Fri Dec  2 10:16:29 2011] Updating aperture counts using extracted products
[Fri Dec  2 10:16:29 2011] Error reading totcts from fullrun_mos1_xmm0553911301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Dec  2 10:16:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 10:16:29 2011] Using photon index=1.80, rate=0.00275, arf fullrun_mos1_xmm0553911301_pi300-10000_pass1_cl_src4.arf
[Fri Dec  2 10:16:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 10:16:29 2011] Updating source flux to 5.6e-14
[Fri Dec  2 10:16:31 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting