[Thu Nov 24 22:49:59 2011] Detection parameters:
  Position = (234.3, 367.0) = 2 20 53.34 -6 4 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 15.7
  Background counts = 79.1
  Rate = 0.004 +/- 0.0009

[Thu Nov 24 22:50:00 2011] Off-axis axis estimate = 6.81'
[Thu Nov 24 23:33:25 2011] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 23:33:25 2011] Initial guess for spatial extent in simple fitting = 9.83"
[Thu Nov 24 23:33:25 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Thu Nov 24 23:33:25 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 9.83"
[Fri Nov 25 00:09:45 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_src15.ximg exists
[Fri Nov 25 00:09:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_src15.csv
[Fri Nov 25 00:09:45 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Nov 25 00:09:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_src15.csv
[Fri Nov 25 00:09:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:09:45 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Nov 25 00:09:45 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Nov 25 00:09:45 2011] Fit fullrun_mos2_xmm0553911001_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Nov 25 00:09:59 2011] Warning, spatial fit 15 centroid is now closest to src. 5
[Fri Nov 25 00:09:59 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:09:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:09:59 2011] Assessing source extent using major
[Fri Nov 25 00:09:59 2011] Source does appear to be extended
[Fri Nov 25 00:09:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:09:59 2011] Source is confused with source 6
[Fri Nov 25 00:47:51 2011] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:47:51 2011] Initial guess for spatial extent in simple fitting = 9.83"
[Fri Nov 25 00:47:51 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Fri Nov 25 00:47:51 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 9.83"
[Fri Nov 25 01:33:07 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_src13.ximg exists
[Fri Nov 25 01:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_src13.csv
[Fri Nov 25 01:33:07 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Nov 25 01:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_src13.csv
[Fri Nov 25 01:33:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:33:07 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Nov 25 01:33:08 2011] fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Nov 25 01:33:08 2011] Fit fullrun_mos2_xmm0553911001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Nov 25 01:33:18 2011] Spatial fit model total counts = 65.481400, observed total counts = 69.000000
[Fri Nov 25 01:33:18 2011] Offset between fit and detection position for source 8 = 3.321472 pixels
[Fri Nov 25 01:33:18 2011] Warning, changing simple spatial fit ID from 13 to 11
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 3.321472 pixels
  Position = (236.3, 369.6) = 2 20 52.75 -6 3 46.7
  Extent = 16.7 (10.9-19.9)", rotation angle = 0
  Source counts = 48.9 +/- 7.0
  Background counts = 0.0
  Rate = 0.004 +/- 0.0005
[Fri Nov 25 01:33:18 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:33:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:33:18 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:33:18 2011] Source does appear to be extended
[Fri Nov 25 01:33:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 02:06:35 2011] XMMSAS src. selection expression = ellipse(20512.639000, 32109.446000, 1004.940029, 1004.940029, 0.000000, X, Y)
[Fri Nov 25 02:06:35 2011] Writing source region out to fullrun_mos2_xmm0553911001_pi300-10000_pass1_cl_src8_src.reg
[Fri Nov 25 02:06:35 2011] Extracting stamp from image fullrun_mos2_xmm0553911001_pi300-10000_cl_sm2.00.img.gz, (179, 312) - (294, 427)
[Fri Nov 25 02:06:35 2011] XMMSAS bgd. selection expression = annulus(20512.639000, 32109.446000, 1674.900048, 3349.800096, X, Y) && !ellipse(17274.528182, 33236.655240, 647.995385, 386.311804, 327.011301, X, Y) && !ellipse(19793.294601, 34736.368988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23779.782460, 28590.837400, 309.786409, 309.786409, 0.000000, X, Y) && !ellipse(16888.892000, 27613.608200, 1200.224035, 361.236010, 94.580029, X, Y) && !ellipse(20431.606125, 32399.343170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18987.318000, 30668.918600, 3080.576089, 3080.576089, 0.000000, X, Y) && !ellipse(21060.483002, 32398.658173, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 02:06:35 2011] Writing fullrun_mos2_xmm0553911001_pi300-10000_pass1_cl_src8.gif
[Fri Nov 25 02:15:43 2011] Mean detx,y = (-5857.49, -5796.40) 
[Fri Nov 25 02:15:46 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 02:16:28 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 02:16:28 2011] Setting source spectrum file to fullrun_mos2_xmm0553911001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Nov 25 02:16:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0553911001_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Nov 25 02:37:49 2011] Not generating rmf since there are only 48 counts
[Fri Nov 25 02:37:49 2011] rmf not generated due to insufficient counts
[Fri Nov 25 02:40:10 2011] Updating aperture counts using extracted products
[Fri Nov 25 02:40:10 2011] Error reading totcts from fullrun_mos2_xmm0553911001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Nov 25 02:40:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 02:40:11 2011] Using photon index=1.80, rate=0.00381, arf fullrun_mos2_xmm0553911001_pi300-10000_pass1_cl_src8.arf
[Fri Nov 25 02:40:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 02:40:11 2011] Updating source flux to 4.9e-14
[Fri Nov 25 02:40:37 2011] Flag c found in src. 8 procflags, skipping spectral fitting
[Fri Nov 25 02:40:37 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting