[Sat Feb 11 09:36:17 2012] Detection parameters:
  Position = (338.1, 298.1) = 2 19 54.17 -5 50 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.6 +/- 7.8
  Background counts = 5.5
  Rate = 0.003 +/- 0.0006

[Sat Feb 11 09:36:17 2012] Off-axis axis estimate = 2.88'
[Sat Feb 11 10:18:10 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 10:18:10 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sat Feb 11 10:18:10 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Sat Feb 11 10:18:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.87"
[Sat Feb 11 10:40:12 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_src13.ximg exists
[Sat Feb 11 10:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_src13.csv
[Sat Feb 11 10:40:12 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Feb 11 10:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_src13.csv
[Sat Feb 11 10:40:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 10:40:12 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Feb 11 10:40:12 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Feb 11 10:40:12 2012] Fit fullrun_mos2_xmm0553910801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Feb 11 10:40:23 2012] Source 9 is offset by 7.363190 and 6.334657 pixels which is larger than
2 X fitted extent = 1.211934 x 1.211934, not incorporating fit results
[Sat Feb 11 10:40:23 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 10:40:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 10:40:23 2012] Assessing source extent using major
[Sat Feb 11 10:40:23 2012] Source does appear to be extended
[Sat Feb 11 10:40:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 11:28:54 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 11:28:54 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sat Feb 11 11:28:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Sat Feb 11 11:28:54 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.87"
[Sat Feb 11 11:48:05 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass1_src12.ximg exists
[Sat Feb 11 11:48:05 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Feb 11 11:48:05 2012] Fit fullrun_mos2_xmm0553910801_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Feb 11 11:48:05 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 11 11:48:05 2012] fullrun_mos2_xmm0553910801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 11 11:48:05 2012] Fit fullrun_mos2_xmm0553910801_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 11 11:48:15 2012] Source 9 is offset by 7.363190 and 6.334657 pixels which is larger than
2 X fitted extent = 1.195467 x 1.195467, not incorporating fit results
[Sat Feb 11 11:48:15 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 11:48:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 11:48:15 2012] Assessing source extent using major
[Sat Feb 11 11:48:15 2012] Source does appear to be extended
[Sat Feb 11 11:48:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:16:46 2012] XMMSAS src. selection expression = ellipse(29368.701569, 25886.219116, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 11 12:16:46 2012] Writing source region out to fullrun_mos2_xmm0553910801_pi300-10000_pass1_cl_src9_src.reg
[Sat Feb 11 12:16:46 2012] Extracting stamp from image fullrun_mos2_xmm0553910801_pi300-10000_cl_sm2.00.img.gz, (301, 261) - (376, 336)
[Sat Feb 11 12:16:46 2012] XMMSAS bgd. selection expression = annulus(29368.701569, 25886.219116, 1087.500000, 2175.000000, X, Y)
[Sat Feb 11 12:16:46 2012] Writing fullrun_mos2_xmm0553910801_pi300-10000_pass1_cl_src9.gif
[Sat Feb 11 12:18:54 2012] Mean detx,y = (-1912.24, -98.49) 
[Sat Feb 11 12:18:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 12:19:04 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 12:19:04 2012] Setting source spectrum file to fullrun_mos2_xmm0553910801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 11 12:19:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553910801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Feb 11 12:27:52 2012] Not generating rmf since there are only 32 counts
[Sat Feb 11 12:27:52 2012] rmf not generated due to insufficient counts
[Sat Feb 11 12:28:24 2012] Updating aperture counts using extracted products
[Sat Feb 11 12:28:24 2012] Error reading totcts from fullrun_mos2_xmm0553910801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 11 12:28:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 12:28:24 2012] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0553910801_pi300-10000_pass1_cl_src9.arf
[Sat Feb 11 12:28:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 12:28:24 2012] Updating source flux to 2.4e-14
[Sat Feb 11 12:28:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting