[Sat Feb 11 09:36:04 2012] Detection parameters:
  Position = (431.3, 316.8) = 2 19 27.01 -5 49 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.0 +/- 7.5
  Background counts = 5.3
  Rate = 0.004 +/- 0.0009

[Sat Feb 11 09:36:05 2012] Off-axis axis estimate = 9.72'
[Sat Feb 11 09:57:41 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 09:57:41 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Sat Feb 11 09:57:41 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Sat Feb 11 09:57:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.29"
[Sat Feb 11 10:18:09 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_src9.ximg exists
[Sat Feb 11 10:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_src9.csv
[Sat Feb 11 10:18:09 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Feb 11 10:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_src9.csv
[Sat Feb 11 10:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 10:18:09 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Feb 11 10:18:09 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Feb 11 10:18:09 2012] Fit fullrun_mos1_xmm0553910801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Feb 11 10:40:20 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.357091 pixels away
[Sat Feb 11 10:40:20 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 10:40:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 10:40:20 2012] Assessing source extent using major
[Sat Feb 11 10:40:20 2012] Source does appear to be extended
[Sat Feb 11 10:40:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 11:09:46 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 11:09:46 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Sat Feb 11 11:09:46 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Sat Feb 11 11:09:46 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.29"
[Sat Feb 11 11:28:54 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_src9.ximg exists
[Sat Feb 11 11:28:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_src9.csv
[Sat Feb 11 11:28:54 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Feb 11 11:28:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_src9.csv
[Sat Feb 11 11:28:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 11:28:54 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Feb 11 11:28:54 2012] fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Feb 11 11:28:54 2012] Fit fullrun_mos1_xmm0553910801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Feb 11 11:48:13 2012] Spatial fit model total counts = 74.991100, observed total counts = 75.000000
[Sat Feb 11 11:48:13 2012] Offset between fit and detection position for source 10 = 0.057904 pixels
[Sat Feb 11 11:48:13 2012] 76.637700 total counts/ 56.275300 bgd. counts: snr = 2.714376
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.057904 pixels
  Position = (431.3, 316.9) = 2 19 27.02 -5 49 31.5
  Extent = 4.8 (3.2-7.9)", rotation angle = 0
  Source counts = 20.4 +/- 8.8
  Background counts = 56.3
  Rate = 0.001 +/- 0.0006
[Sat Feb 11 11:48:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 11:48:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 11:48:13 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 11:48:13 2012] Source does appear to be extended
[Sat Feb 11 11:48:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:09:15 2012] XMMSAS src. selection expression = ellipse(37471.696800, 27519.125400, 287.232608, 287.232608, 0.000000, X, Y)
[Sat Feb 11 12:09:15 2012] Writing source region out to fullrun_mos1_xmm0553910801_pi300-10000_pass1_cl_src10_src.reg
[Sat Feb 11 12:09:15 2012] Extracting stamp from image fullrun_mos1_xmm0553910801_pi300-10000_cl_sm2.00.img.gz, (415, 300) - (448, 333)
[Sat Feb 11 12:09:15 2012] XMMSAS bgd. selection expression = annulus(37471.696800, 27519.125400, 478.721014, 957.442028, X, Y)
[Sat Feb 11 12:09:15 2012] Writing fullrun_mos1_xmm0553910801_pi300-10000_pass1_cl_src10.gif
[Sat Feb 11 12:10:53 2012] Mean detx,y = (5226.25, 8243.36) 
[Sat Feb 11 12:10:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 12:11:01 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 12:11:01 2012] Setting source spectrum file to fullrun_mos1_xmm0553910801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 11 12:11:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553910801_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Feb 11 12:16:11 2012] Not generating rmf since there are only 20 counts
[Sat Feb 11 12:16:11 2012] rmf not generated due to insufficient counts
[Sat Feb 11 12:28:24 2012] Updating aperture counts using extracted products
[Sat Feb 11 12:28:24 2012] Error reading totcts from fullrun_mos1_xmm0553910801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 11 12:28:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 12:28:24 2012] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0553910801_pi300-10000_pass1_cl_src10.arf
[Sat Feb 11 12:28:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 12:28:24 2012] Updating source flux to 3e-14
[Sat Feb 11 12:28:26 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting