[Thu Mar 22 03:48:40 2012] Detection parameters:
  Position = (376.1, 374.5) = 2 21 3.12 -5 45 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.9 +/- 13.5
  Background counts = 9.1
  Rate = 0.01 +/- 0.001

[Thu Mar 22 03:48:40 2012] Off-axis axis estimate = 7.88'
[Thu Mar 22 04:52:58 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 04:52:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 04:52:58 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Thu Mar 22 04:52:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.661
[Thu Mar 22 04:52:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.37"
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 22 05:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src1.csv
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 22 05:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src1.csv
[Thu Mar 22 05:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 22 05:55:53 2012] Fit fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 22 06:25:59 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.781440 pixels away
[Thu Mar 22 06:25:59 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:25:59 2012] Assessing source extent using major
[Thu Mar 22 06:25:59 2012] Source does appear to be extended
[Thu Mar 22 06:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 07:21:33 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 07:21:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 07:21:33 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Thu Mar 22 07:21:33 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.661
[Thu Mar 22 07:21:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.37"
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 22 07:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 22 07:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 07:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 22 07:51:51 2012] Fit fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 22 08:21:33 2012] Spatial fit model total counts = 229.193000, observed total counts = 218.000000
[Thu Mar 22 08:21:33 2012] Offset between fit and detection position for source 3 = 0.342269 pixels
[Thu Mar 22 08:21:33 2012] 231.227800 total counts/ 144.155000 bgd. counts: snr = 7.252165
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.342269 pixels
  Position = (375.8, 374.3) = 2 21 3.20 -5 45 20.9
  Extent = 6.7 (4.7-8.9)", rotation angle = 0
  Source counts = 87.1 +/- 15.2
  Background counts = 144.2
  Rate = 0.006 +/- 0.001
[Thu Mar 22 08:21:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 08:21:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 08:21:33 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 08:21:33 2012] Source does appear to be extended
[Thu Mar 22 08:21:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:02:51 2012] XMMSAS src. selection expression = ellipse(32647.492860, 32514.772400, 400.082412, 400.082412, 0.000000, X, Y)
[Thu Mar 22 09:02:51 2012] Writing source region out to fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3_src.reg
[Thu Mar 22 09:02:51 2012] Extracting stamp from image fullrun_mos1_xmm0553910701_pi300-10000_cl_sm2.00.img.gz, (353, 351) - (399, 397)
[Thu Mar 22 09:02:51 2012] XMMSAS bgd. selection expression = annulus(32647.492860, 32514.772400, 666.804019, 1333.608038, X, Y)
[Thu Mar 22 09:02:51 2012] Writing fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3.gif
[Thu Mar 22 09:02:54 2012] Mean detx,y = (7524.20, 1687.42) 
[Thu Mar 22 09:02:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 09:03:18 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 09:03:19 2012] Setting source spectrum file to fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 22 09:03:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar 22 09:10:55 2012] Not generating rmf since there are only 87 counts
[Thu Mar 22 09:10:55 2012] rmf not generated due to insufficient counts
[Thu Mar 22 09:28:23 2012] Updating aperture counts using extracted products
[Thu Mar 22 09:28:24 2012] Error reading totcts from fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 22 09:28:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 09:28:24 2012] Using photon index=1.80, rate=0.00589, arf fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3.arf
[Thu Mar 22 09:28:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 09:28:24 2012] Updating source flux to 9.5e-14
[Thu Mar 22 09:28:28 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Mar 22 09:28:29 2012] xmm0553910701/analysis//spectral/fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete