[Thu Mar 22 03:48:40 2012] Detection parameters:
  Position = (403.5, 149.8) = 2 20 55.12 -6 1 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 11.2
  Background counts = 7.5
  Rate = 0.005 +/- 0.0007

[Thu Mar 22 03:48:40 2012] Off-axis axis estimate = 13.19'
[Thu Mar 22 04:52:58 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 04:52:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 04:52:58 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Thu Mar 22 04:52:58 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.003
[Thu Mar 22 04:52:58 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.02"
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src6.ximg exists
[Thu Mar 22 05:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src6.csv
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Mar 22 05:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src6.csv
[Thu Mar 22 05:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Mar 22 05:55:53 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Mar 22 05:55:53 2012] Fit fullrun_mos1_xmm0553910701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Mar 22 06:25:59 2012] Spatial fit model total counts = 138.684000, observed total counts = 138.000000
[Thu Mar 22 06:25:59 2012] Offset between fit and detection position for source 1 = 0.482023 pixels
[Thu Mar 22 06:25:59 2012] 139.903700 total counts/ 92.647700 bgd. counts: snr = 4.909527
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.482023 pixels
  Position = (403.0, 149.8) = 2 20 55.27 -6 1 37.5
  Extent = 5.7 (4.4-7.2)", rotation angle = 0
  Source counts = 47.3 +/- 11.8
  Background counts = 92.6
  Rate = 0.003 +/- 0.0008
[Thu Mar 22 06:25:59 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:25:59 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:25:59 2012] Source does appear to be extended
[Thu Mar 22 06:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 07:21:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 07:21:33 2012] Initial guess for spatial extent in simple fitting = 5.72"
[Thu Mar 22 07:21:33 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.215
[Thu Mar 22 07:21:33 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.72"
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src6.ximg exists
[Thu Mar 22 07:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src6.csv
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Mar 22 07:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src6.csv
[Thu Mar 22 07:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Mar 22 07:51:51 2012] fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Mar 22 07:51:51 2012] Fit fullrun_mos1_xmm0553910701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Mar 22 08:21:33 2012] Warning, spatial fit 6 centroid is now closest to src. 18
[Thu Mar 22 08:21:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 08:21:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 08:21:33 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 08:21:33 2012] Source does appear to be extended
[Thu Mar 22 08:21:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:02:51 2012] XMMSAS src. selection expression = ellipse(35010.243420, 12981.818860, 343.074610, 343.074610, 0.000000, X, Y)
[Thu Mar 22 09:02:51 2012] Writing source region out to fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 22 09:02:51 2012] Extracting stamp from image fullrun_mos1_xmm0553910701_pi300-10000_cl_sm2.00.img.gz, (383, 130) - (423, 169)
[Thu Mar 22 09:02:51 2012] XMMSAS bgd. selection expression = annulus(35010.243420, 12981.818860, 571.791016, 1143.582033, X, Y)
[Thu Mar 22 09:02:51 2012] Writing fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1.gif
[Thu Mar 22 09:05:20 2012] Mean detx,y = (-8885.86, 12570.23) 
[Thu Mar 22 09:05:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 09:05:36 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 09:05:36 2012] Setting source spectrum file to fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 09:05:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 22 09:11:40 2012] Not generating rmf since there are only 47 counts
[Thu Mar 22 09:11:40 2012] rmf not generated due to insufficient counts
[Thu Mar 22 09:28:24 2012] Updating aperture counts using extracted products
[Thu Mar 22 09:28:24 2012] Error reading totcts from fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 09:28:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 09:28:24 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 09:28:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 09:28:24 2012] Updating source flux to 8.7e-14
[Thu Mar 22 09:28:28 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Mar 22 09:28:29 2012] xmm0553910701/analysis//spectral/fullrun_mos1_xmm0553910701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete