[Thu Feb 23 07:23:09 2012] Detection parameters:
  Position = (293.5, 265.9) = 2 23 27.59 -5 33 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 343.7 +/- 23.4
  Background counts = 14.5
  Rate = 0.03 +/- 0.002

[Thu Feb 23 07:23:09 2012] Off-axis axis estimate = 2.38'
[Thu Feb 23 07:24:40 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:24:40 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Thu Feb 23 07:24:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Thu Feb 23 07:24:40 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.62"
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src24.ximg exists
[Thu Feb 23 08:15:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src24.csv
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Feb 23 08:15:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src24.csv
[Thu Feb 23 08:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 08:15:53 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Feb 23 08:15:53 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Feb 23 08:15:53 2012] Fit fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Feb 23 08:59:08 2012] Spatial fit model total counts = 464.000000, observed total counts = 464.000000
[Thu Feb 23 08:59:08 2012] Offset between fit and detection position for source 24 = 0.073725 pixels
[Thu Feb 23 08:59:08 2012] 464.971000 total counts/ 212.106000 bgd. counts: snr = 17.362499
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.073725 pixels
  Position = (293.5, 265.9) = 2 23 27.59 -5 33 9.2
  Extent = 6.3 (5.5-7.0)", rotation angle = 0
  Source counts = 252.9 +/- 21.6
  Background counts = 212.1
  Rate = 0.02 +/- 0.002
[Thu Feb 23 08:59:08 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:59:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:59:08 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:59:08 2012] Source does appear to be extended
[Thu Feb 23 08:59:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 08:59:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 08:59:22 2012] Initial guess for spatial extent in simple fitting = 6.32"
[Thu Feb 23 08:59:22 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.786
[Thu Feb 23 08:59:22 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 6.32"
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src24.ximg exists
[Thu Feb 23 09:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src24.csv
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Feb 23 09:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src24.csv
[Thu Feb 23 09:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Feb 23 09:38:34 2012] Fit fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Feb 23 10:30:54 2012] Spatial fit model total counts = 463.116000, observed total counts = 464.000000
[Thu Feb 23 10:30:54 2012] Offset between fit and detection position for source 24 = 0.007886 pixels
[Thu Feb 23 10:30:54 2012] 464.077000 total counts/ 213.974000 bgd. counts: snr = 17.097728
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.007886 pixels
  Position = (293.5, 265.9) = 2 23 27.59 -5 33 9.2
  Extent = 6.2 (5.5-7.0)", rotation angle = 0
  Source counts = 250.1 +/- 21.5
  Background counts = 214.0
  Rate = 0.02 +/- 0.002
[Thu Feb 23 10:30:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 10:30:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 10:30:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 10:30:54 2012] Source does appear to be extended
[Thu Feb 23 10:30:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 10:31:16 2012] XMMSAS src. selection expression = ellipse(25486.029600, 23080.977600, 374.740326, 374.740326, 0.000000, X, Y)
[Thu Feb 23 10:31:16 2012] Writing source region out to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src24_src.reg
[Thu Feb 23 10:31:16 2012] Extracting stamp from image fullrun_pn_xmm0553910601_pi300-10000_cl_sm2.00.img.gz, (272, 244) - (315, 287)
[Thu Feb 23 10:31:16 2012] XMMSAS bgd. selection expression = annulus(25486.029600, 23080.977600, 624.567211, 1249.134421, X, Y)
[Thu Feb 23 10:31:16 2012] Writing fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src24.gif
[Thu Feb 23 10:51:13 2012] Mean detx,y = (-183.21, 4205.18) 
[Thu Feb 23 10:51:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 10:51:37 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 10:51:39 2012] Setting source spectrum file to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Feb 23 10:51:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Feb 23 11:25:21 2012] Updating aperture counts using extracted products
[Thu Feb 23 11:25:21 2012] Error reading totcts from fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Feb 23 11:25:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 11:25:23 2012] Using photon index=1.80, rate=0.0175, arf fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src24.arf
[Thu Feb 23 11:25:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 11:25:23 2012] Updating source flux to 5.9e-14