[Thu Feb 23 07:23:09 2012] Detection parameters:
  Position = (367.6, 168.1) = 2 23 6.00 -5 40 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.3 +/- 10.8
  Background counts = 15.5
  Rate = 0.004 +/- 0.0008

[Thu Feb 23 07:23:09 2012] Off-axis axis estimate = 10.70'
[Thu Feb 23 07:24:40 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:24:40 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Thu Feb 23 07:24:40 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.021
[Thu Feb 23 07:24:40 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.78"
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src13.ximg exists
[Thu Feb 23 08:15:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src13.csv
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Feb 23 08:15:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src13.csv
[Thu Feb 23 08:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 08:15:53 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Feb 23 08:15:53 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Feb 23 08:15:53 2012] Fit fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Feb 23 08:59:08 2012] Spatial fit model total counts = 222.000000, observed total counts = 222.000000
[Thu Feb 23 08:59:08 2012] Offset between fit and detection position for source 13 = 0.083400 pixels
[Thu Feb 23 08:59:08 2012] 218.816600 total counts/ 182.623000 bgd. counts: snr = 2.678268
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.083400 pixels
  Position = (367.5, 168.2) = 2 23 6.02 -5 40 14.2
  Extent = 4.2 (3.1-6.4)", rotation angle = 0
  Source counts = 36.2 +/- 14.8
  Background counts = 182.6
  Rate = 0.003 +/- 0.001
[Thu Feb 23 08:59:08 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:59:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:59:08 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:59:08 2012] Source does appear to be extended
[Thu Feb 23 08:59:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 08:59:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 08:59:22 2012] Initial guess for spatial extent in simple fitting = 4.18"
[Thu Feb 23 08:59:22 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.055
[Thu Feb 23 08:59:22 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 4.18"
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src13.ximg exists
[Thu Feb 23 09:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src13.csv
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Feb 23 09:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src13.csv
[Thu Feb 23 09:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Feb 23 09:38:34 2012] Fit fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Feb 23 10:30:54 2012] Spatial fit model total counts = 195.000000, observed total counts = 195.000000
[Thu Feb 23 10:30:54 2012] Offset between fit and detection position for source 13 = 0.006771 pixels
[Thu Feb 23 10:30:54 2012] 195.121800 total counts/ 159.389000 bgd. counts: snr = 2.830335
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.006771 pixels
  Position = (367.5, 168.2) = 2 23 6.02 -5 40 14.1
  Extent = 4.1 (3.1-6.3)", rotation angle = 0
  Source counts = 35.7 +/- 14.0
  Background counts = 159.4
  Rate = 0.003 +/- 0.001
[Thu Feb 23 10:30:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 10:30:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 10:30:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 10:30:54 2012] Source does appear to be extended
[Thu Feb 23 10:30:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 10:31:16 2012] XMMSAS src. selection expression = ellipse(31924.497400, 14582.098000, 246.315607, 246.315607, 0.000000, X, Y)
[Thu Feb 23 10:31:16 2012] Writing source region out to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src13_src.reg
[Thu Feb 23 10:31:16 2012] Extracting stamp from image fullrun_pn_xmm0553910601_pi300-10000_cl_sm2.00.img.gz, (353, 154) - (382, 182)
[Thu Feb 23 10:31:16 2012] XMMSAS bgd. selection expression = annulus(31924.497400, 14582.098000, 410.526012, 821.052024, X, Y) && !ellipse(33282.222717, 13156.329361, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 10:31:16 2012] Writing fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src13.gif
[Thu Feb 23 10:42:04 2012] Mean detx,y = (9375.98, 8948.25) 
[Thu Feb 23 10:42:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 10:42:35 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 10:42:36 2012] Setting source spectrum file to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Feb 23 10:42:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Feb 23 11:04:40 2012] Not generating rmf since there are only 35 counts
[Thu Feb 23 11:04:40 2012] rmf not generated due to insufficient counts
[Thu Feb 23 11:25:20 2012] Updating aperture counts using extracted products
[Thu Feb 23 11:25:21 2012] Error reading totcts from fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Feb 23 11:25:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 11:25:22 2012] Using photon index=1.80, rate=0.00251, arf fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src13.arf
[Thu Feb 23 11:25:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 11:25:22 2012] Updating source flux to 2e-14
[Thu Feb 23 11:25:30 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting