[Thu Feb 23 07:23:08 2012] Detection parameters:
  Position = (141.8, 377.9) = 2 24 11.78 -5 25 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.0 +/- 21.0
  Background counts = 15.0
  Rate = 0.02 +/- 0.001

[Thu Feb 23 07:23:09 2012] Off-axis axis estimate = 12.73'
[Thu Feb 23 07:24:40 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:24:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 07:24:40 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Thu Feb 23 07:24:40 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.034
[Thu Feb 23 07:24:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.80"
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 23 08:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 23 08:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 08:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 08:15:52 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 08:15:52 2012] Fit fullrun_pn_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 08:59:08 2012] Spatial fit model total counts = 600.945000, observed total counts = 601.000000
[Thu Feb 23 08:59:08 2012] Offset between fit and detection position for source 1 = 0.175114 pixels
[Thu Feb 23 08:59:08 2012] 601.033000 total counts/ 443.385000 bgd. counts: snr = 7.486830
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.175114 pixels
  Position = (142.0, 377.8) = 2 24 11.73 -5 25 2.0
  Extent = 5.7 (4.8-7.1)", rotation angle = 0
  Source counts = 157.6 +/- 24.5
  Background counts = 443.4
  Rate = 0.01 +/- 0.002
[Thu Feb 23 08:59:08 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:59:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:59:08 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:59:08 2012] Source does appear to be extended
[Thu Feb 23 08:59:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 08:59:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 08:59:22 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Thu Feb 23 08:59:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.218
[Thu Feb 23 08:59:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.71"
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 23 09:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 23 09:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 09:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 09:38:34 2012] fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 09:38:34 2012] Fit fullrun_pn_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 10:30:54 2012] Spatial fit model total counts = 413.996000, observed total counts = 414.000000
[Thu Feb 23 10:30:54 2012] Offset between fit and detection position for source 1 = 0.067869 pixels
[Thu Feb 23 10:30:54 2012] 411.359000 total counts/ 272.028000 bgd. counts: snr = 8.447748
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.067869 pixels
  Position = (142.0, 377.9) = 2 24 11.72 -5 25 1.7
  Extent = 5.0 (4.2-6.1)", rotation angle = 0
  Source counts = 139.3 +/- 20.3
  Background counts = 272.0
  Rate = 0.01 +/- 0.001
[Thu Feb 23 10:30:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 10:30:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 10:30:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 10:30:54 2012] Source does appear to be extended
[Thu Feb 23 10:30:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 10:31:16 2012] XMMSAS src. selection expression = ellipse(12304.266988, 32828.985600, 300.516609, 300.516609, 0.000000, X, Y)
[Thu Feb 23 10:31:16 2012] Writing source region out to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 23 10:31:16 2012] Extracting stamp from image fullrun_pn_xmm0553910601_pi300-10000_cl_sm2.00.img.gz, (125, 361) - (159, 395)
[Thu Feb 23 10:31:16 2012] XMMSAS bgd. selection expression = annulus(12304.266988, 32828.985600, 500.861014, 1001.722029, X, Y)
[Thu Feb 23 10:31:16 2012] Writing fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1.gif
[Thu Feb 23 10:31:31 2012] Mean detx,y = (-16328.72, 1361.88) 
[Thu Feb 23 10:31:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 10:31:48 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 10:31:48 2012] Setting source spectrum file to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 10:31:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 23 11:25:20 2012] Updating aperture counts using extracted products
[Thu Feb 23 11:25:20 2012] Error reading totcts from fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 11:25:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 11:25:22 2012] Using photon index=1.80, rate=0.00977, arf fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 11:25:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 11:25:22 2012] Updating source flux to 9.9e-14
[Thu Feb 23 11:25:55 2012] Reading fit data from xmm0553910601/analysis//spectral/fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 23 11:25:55 2012] Spectral fit parameter nH value = 3.00698e+21
[Thu Feb 23 11:25:55 2012] Spectral fit parameter PhoIndex value = 4.35808
[Thu Feb 23 11:25:55 2012] Failed to get F(0.3-8.0) from xmm0553910601/analysis//spectral/fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 23 11:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 11:25:55 2012] Using Nh = 3e+21, photon index=4.36, rate=0.00977, arf fullrun_pn_xmm0553910601_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 11:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 11:25:55 2012] Updating source flux to 6e-14