[Thu Feb 23 07:23:27 2012] Detection parameters:
  Position = (293.5, 266.0) = 2 23 27.58 -5 33 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.5 +/- 14.1
  Background counts = 5.0
  Rate = 0.01 +/- 0.001

[Thu Feb 23 07:23:27 2012] Off-axis axis estimate = 2.38'
[Thu Feb 23 08:15:53 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 08:15:53 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Thu Feb 23 08:15:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Thu Feb 23 08:15:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.62"
[Thu Feb 23 08:30:12 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 23 08:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 08:30:12 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 23 08:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 08:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 08:30:12 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 08:30:12 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 08:30:12 2012] Fit fullrun_mos1_xmm0553910601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 08:59:10 2012] Spatial fit model total counts = 175.000000, observed total counts = 175.000000
[Thu Feb 23 08:59:10 2012] Offset between fit and detection position for source 4 = 0.065010 pixels
[Thu Feb 23 08:59:10 2012] 176.569900 total counts/ 96.610000 bgd. counts: snr = 8.135068
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.065010 pixels
  Position = (293.5, 265.9) = 2 23 27.58 -5 33 9.0
  Extent = 4.4 (3.7-5.7)", rotation angle = 0
  Source counts = 80.0 +/- 13.3
  Background counts = 96.6
  Rate = 0.006 +/- 0.0009
[Thu Feb 23 08:59:10 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:59:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:59:10 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:59:10 2012] Source does appear to be extended
[Thu Feb 23 08:59:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 09:38:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 09:38:34 2012] Initial guess for spatial extent in simple fitting = 4.42"
[Thu Feb 23 09:38:34 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.980
[Thu Feb 23 09:38:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.42"
[Thu Feb 23 09:53:27 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 23 09:53:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 09:53:27 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 23 09:53:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 09:53:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 09:53:27 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 09:53:27 2012] fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 09:53:27 2012] Fit fullrun_mos1_xmm0553910601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 10:30:57 2012] Spatial fit model total counts = 175.000000, observed total counts = 175.000000
[Thu Feb 23 10:30:57 2012] Offset between fit and detection position for source 4 = 0.002521 pixels
[Thu Feb 23 10:30:57 2012] 176.553700 total counts/ 96.276800 bgd. counts: snr = 8.181440
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.002521 pixels
  Position = (293.5, 265.9) = 2 23 27.58 -5 33 9.0
  Extent = 4.5 (3.7-5.7)", rotation angle = 0
  Source counts = 80.3 +/- 13.3
  Background counts = 96.3
  Rate = 0.006 +/- 0.0009
[Thu Feb 23 10:30:57 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 10:30:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 10:30:57 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 10:30:57 2012] Source does appear to be extended
[Thu Feb 23 10:30:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 11:10:41 2012] XMMSAS src. selection expression = ellipse(25489.394600, 23084.926980, 267.397808, 267.397808, 0.000000, X, Y)
[Thu Feb 23 11:10:41 2012] Writing source region out to fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4_src.reg
[Thu Feb 23 11:10:41 2012] Extracting stamp from image fullrun_mos1_xmm0553910601_pi300-10000_cl_sm2.00.img.gz, (278, 251) - (309, 281)
[Thu Feb 23 11:10:41 2012] XMMSAS bgd. selection expression = annulus(25489.394600, 23084.926980, 445.663013, 891.326026, X, Y)
[Thu Feb 23 11:10:41 2012] Writing fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4.gif
[Thu Feb 23 11:10:43 2012] Mean detx,y = (-4133.34, -473.86) 
[Thu Feb 23 11:10:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 11:10:55 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 11:10:55 2012] Setting source spectrum file to fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Feb 23 11:10:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Feb 23 11:15:52 2012] Not generating rmf since there are only 80 counts
[Thu Feb 23 11:15:52 2012] rmf not generated due to insufficient counts
[Thu Feb 23 11:25:23 2012] Updating aperture counts using extracted products
[Thu Feb 23 11:25:23 2012] Error reading totcts from fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Feb 23 11:25:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 11:25:24 2012] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4.arf
[Thu Feb 23 11:25:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 11:25:24 2012] Updating source flux to 8.6e-14
[Thu Feb 23 11:25:28 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 23 11:25:29 2012] xmm0553910601/analysis//spectral/fullrun_mos1_xmm0553910601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete