[Wed May  2 11:30:02 2012] Detection parameters:
  Position = (380.9, 341.5) = 2 25 30.68 -5 25 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 7.8
  Background counts = 3.8
  Rate = 0.003 +/- 0.0007

[Wed May  2 11:30:03 2012] Off-axis axis estimate = 6.74'
[Wed May  2 12:36:48 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:36:48 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Wed May  2 12:36:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.759
[Wed May  2 12:36:48 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.80"
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src10.ximg exists
[Wed May  2 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src10.csv
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May  2 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src10.csv
[Wed May  2 13:04:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May  2 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May  2 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May  2 13:04:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 13:04:53 2012] Spatial fit model total counts = 67.365400, observed total counts = 58.000000
[Wed May  2 13:04:53 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 13:04:53 2012] Vigneting correction estimate = 1.000000
[Wed May  2 13:04:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 13:04:53 2012] Assessing source extent using major
[Wed May  2 13:04:53 2012] Source does appear to be extended
[Wed May  2 13:04:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 14:14:40 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Wed May  2 14:14:40 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Wed May  2 14:14:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.759
[Wed May  2 14:14:40 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.80"
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src10.ximg exists
[Wed May  2 14:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src10.csv
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May  2 14:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src10.csv
[Wed May  2 14:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May  2 14:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  2 14:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May  2 14:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 14:42:03 2012] Spatial fit model total counts = 67.365400, observed total counts = 58.000000
[Wed May  2 14:42:03 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 14:42:03 2012] Vigneting correction estimate = 1.000000
[Wed May  2 14:42:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 14:42:03 2012] Assessing source extent using major
[Wed May  2 14:42:03 2012] Source does appear to be extended
[Wed May  2 14:42:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 15:30:30 2012] XMMSAS src. selection expression = ellipse(33086.363861, 29659.777740, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 15:30:30 2012] Writing source region out to fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src6_src.reg
[Wed May  2 15:30:30 2012] Extracting stamp from image fullrun_mos2_xmm0553910401_pi300-10000_cl_sm2.00.img.gz, (343, 304) - (418, 379)
[Wed May  2 15:30:30 2012] XMMSAS bgd. selection expression = annulus(33086.363861, 29659.777740, 1087.500000, 2175.000000, X, Y) && !ellipse(31544.239100, 28522.005800, 418.109612, 280.012008, 72.837621, X, Y)
[Wed May  2 15:30:30 2012] Writing fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src6.gif
[Wed May  2 15:35:15 2012] Mean detx,y = (7013.04, -7123.49) 
[Wed May  2 15:35:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 15:36:08 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 15:36:09 2012] Setting source spectrum file to fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May  2 15:36:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May  2 15:43:33 2012] Not generating rmf since there are only 36 counts
[Wed May  2 15:43:33 2012] rmf not generated due to insufficient counts
[Wed May  2 15:44:36 2012] Updating aperture counts using extracted products
[Wed May  2 15:44:36 2012] Error reading totcts from fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May  2 15:44:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 15:44:36 2012] Using photon index=1.80, rate=0.00314, arf fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src6.arf
[Wed May  2 15:44:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 15:44:36 2012] Updating source flux to 7e-14
[Wed May  2 15:44:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting