[Wed May  2 11:30:01 2012] Detection parameters:
  Position = (341.2, 286.1) = 2 25 42.23 -5 29 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 15.1
  Background counts = 4.9
  Rate = 0.02 +/- 0.002

[Wed May  2 11:30:03 2012] Off-axis axis estimate = 3.23'
[Wed May  2 12:36:48 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:36:48 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Wed May  2 12:36:48 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Wed May  2 12:36:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.04"
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  2 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src1.csv
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  2 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src1.csv
[Wed May  2 13:04:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  2 13:04:40 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  2 13:04:40 2012] Fit fullrun_mos2_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  2 13:04:53 2012] Spatial fit model total counts = 166.000000, observed total counts = 166.000000
[Wed May  2 13:04:53 2012] Offset between fit and detection position for source 1 = 0.175487 pixels
[Wed May  2 13:04:53 2012] 165.309600 total counts/ 64.422600 bgd. counts: snr = 12.569444
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.175487 pixels
  Position = (341.1, 286.2) = 2 25 42.26 -5 29 49.6
  Extent = 5.0 (4.3-5.8)", rotation angle = 0
  Source counts = 100.9 +/- 12.9
  Background counts = 64.4
  Rate = 0.009 +/- 0.001
[Wed May  2 13:04:53 2012] Vigneting correction estimate = 1.000000
[Wed May  2 13:04:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 13:04:53 2012] Assessing source extent using major axis lower bound
[Wed May  2 13:04:53 2012] Source does appear to be extended
[Wed May  2 13:04:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 14:14:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 14:14:40 2012] Initial guess for spatial extent in simple fitting = 5.01"
[Wed May  2 14:14:40 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.100
[Wed May  2 14:14:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.01"
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  2 14:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src1.csv
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  2 14:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src1.csv
[Wed May  2 14:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  2 14:41:49 2012] fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  2 14:41:49 2012] Fit fullrun_mos2_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May  2 14:42:03 2012] Spatial fit model total counts = 166.000000, observed total counts = 166.000000
[Wed May  2 14:42:03 2012] Offset between fit and detection position for source 1 = 0.000063 pixels
[Wed May  2 14:42:03 2012] 165.308900 total counts/ 64.429900 bgd. counts: snr = 12.567736
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000063 pixels
  Position = (341.1, 286.2) = 2 25 42.26 -5 29 49.6
  Extent = 5.0 (4.3-5.8)", rotation angle = 0
  Source counts = 100.9 +/- 12.9
  Background counts = 64.4
  Rate = 0.009 +/- 0.001
[Wed May  2 14:42:03 2012] Vigneting correction estimate = 1.000000
[Wed May  2 14:42:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 14:42:03 2012] Assessing source extent using major axis lower bound
[Wed May  2 14:42:03 2012] Source does appear to be extended
[Wed May  2 14:42:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 15:30:30 2012] XMMSAS src. selection expression = ellipse(29626.002540, 24852.354000, 300.423609, 300.423609, 0.000000, X, Y)
[Wed May  2 15:30:30 2012] Writing source region out to fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1_src.reg
[Wed May  2 15:30:30 2012] Extracting stamp from image fullrun_mos2_xmm0553910401_pi300-10000_cl_sm2.00.img.gz, (324, 269) - (358, 303)
[Wed May  2 15:30:30 2012] XMMSAS bgd. selection expression = annulus(29626.002540, 24852.354000, 500.706014, 1001.412029, X, Y)
[Wed May  2 15:30:30 2012] Writing fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1.gif
[Wed May  2 15:30:33 2012] Mean detx,y = (5045.66, -1628.74) 
[Wed May  2 15:30:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 15:30:50 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 15:30:50 2012] Setting source spectrum file to fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  2 15:30:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  2 15:44:35 2012] Updating aperture counts using extracted products
[Wed May  2 15:44:35 2012] Error reading totcts from fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  2 15:44:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 15:44:36 2012] Using photon index=1.80, rate=0.00868, arf fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1.arf
[Wed May  2 15:44:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 15:44:36 2012] Updating source flux to 1.4e-13
[Wed May  2 15:45:00 2012] Reading fit data from xmm0553910401/analysis//spectral/fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1_pl.csv
[Wed May  2 15:45:00 2012] Spectral fit parameter nH value = 1.51839e+13
[Wed May  2 15:45:00 2012] Spectral fit parameter PhoIndex value = 1.75182
[Wed May  2 15:45:00 2012] Failed to get F(0.3-8.0) from xmm0553910401/analysis//spectral/fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May  2 15:45:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 15:45:00 2012] Using Nh = 1.5e+13, photon index=1.75, rate=0.00868, arf fullrun_mos2_xmm0553910401_pi300-10000_pass1_cl_src1.arf
[Wed May  2 15:45:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 15:45:00 2012] Updating source flux to 1.4e-13