[Wed May  2 11:30:00 2012] Detection parameters:
  Position = (212.4, 231.8) = 2 26 19.76 -5 33 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 8.6
  Background counts = 5.0
  Rate = 0.005 +/- 0.001

[Wed May  2 11:30:00 2012] Off-axis axis estimate = 7.89'
[Wed May  2 12:11:37 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:11:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 12:11:37 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Wed May  2 12:11:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.991
[Wed May  2 12:11:37 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.37"
[Wed May  2 12:36:48 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_src7.ximg exists
[Wed May  2 12:36:48 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May  2 12:36:48 2012] Fit fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_src7 appears to have run properly
[Wed May  2 12:36:48 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May  2 12:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May  2 12:36:48 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May  2 12:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May  2 12:36:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 13:04:49 2012] Spatial fit model total counts = 97.989300, observed total counts = 91.000000
[Wed May  2 13:04:49 2012] Offset between fit and detection position for source 8 = 0.228657 pixels
[Wed May  2 13:04:49 2012] 98.331300 total counts/ 66.819100 bgd. counts: snr = 3.855036
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.228657 pixels
  Position = (212.2, 231.7) = 2 26 19.83 -5 33 46.7
  Extent = 6.2 (5.5-6.2)" x 5.7 (4.4-12.5)", rotation angle = 90 (90-21) degrees
  Source counts = 31.5 +/- 9.9
  Background counts = 66.8
  Rate = 0.003 +/- 0.0009
[Wed May  2 13:04:49 2012] Vigneting correction estimate = 1.000000
[Wed May  2 13:04:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 13:04:49 2012] Assessing source extent using major axis lower bound
[Wed May  2 13:04:49 2012] Source does appear to be extended
[Wed May  2 13:04:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.44
[Wed May  2 13:39:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 13:39:49 2012] Initial guess for spatial extent in simple fitting = 5.92"
[Wed May  2 13:39:49 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.154
[Wed May  2 13:39:49 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.92"
[Wed May  2 14:14:40 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_src7.ximg exists
[Wed May  2 14:14:40 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May  2 14:14:40 2012] Fit fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_src7 appears to have run properly
[Wed May  2 14:14:40 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May  2 14:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May  2 14:14:40 2012] fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May  2 14:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May  2 14:14:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 14:41:59 2012] Spatial fit model total counts = 100.157000, observed total counts = 91.000000
[Wed May  2 14:41:59 2012] Offset between fit and detection position for source 8 = 0.104822 pixels
[Wed May  2 14:41:59 2012] 100.087500 total counts/ 68.421000 bgd. counts: snr = 3.828295
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.104822 pixels
  Position = (212.3, 231.7) = 2 26 19.80 -5 33 46.7
  Extent = 6.6" x 5.3", rotation angle = 69
  Source counts = 31.7 +/- 10.0
  Background counts = 68.4
  Rate = 0.003 +/- 0.0009
[Wed May  2 14:41:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 14:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 14:41:59 2012] Assessing source extent using major
[Wed May  2 14:41:59 2012] Source does appear to be extended
[Wed May  2 14:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.23
[Wed May  2 15:17:48 2012] XMMSAS src. selection expression = ellipse(18418.927415, 20110.832354, 393.318030, 320.749688, 69.102383, X, Y)
[Wed May  2 15:17:48 2012] Writing source region out to fullrun_mos1_xmm0553910401_pi300-10000_pass1_cl_src8_src.reg
[Wed May  2 15:17:48 2012] Extracting stamp from image fullrun_mos1_xmm0553910401_pi300-10000_cl_sm2.00.img.gz, (190, 209) - (235, 254)
[Wed May  2 15:17:48 2012] XMMSAS bgd. selection expression = annulus(18418.927415, 20110.832354, 655.530050, 1311.060100, X, Y)
[Wed May  2 15:17:48 2012] Writing fullrun_mos1_xmm0553910401_pi300-10000_pass1_cl_src8.gif
[Wed May  2 15:20:12 2012] Mean detx,y = (6231.66, 4278.05) 
[Wed May  2 15:20:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 15:20:35 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 15:20:36 2012] Setting source spectrum file to fullrun_mos1_xmm0553910401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May  2 15:20:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553910401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May  2 15:29:25 2012] Not generating rmf since there are only 31 counts
[Wed May  2 15:29:25 2012] rmf not generated due to insufficient counts
[Wed May  2 15:44:34 2012] Updating aperture counts using extracted products
[Wed May  2 15:44:34 2012] Error reading totcts from fullrun_mos1_xmm0553910401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May  2 15:44:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 15:44:35 2012] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0553910401_pi300-10000_pass1_cl_src8.arf
[Wed May  2 15:44:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 15:44:35 2012] Updating source flux to 4.2e-14
[Wed May  2 15:44:38 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting