[Thu Mar 22 00:52:33 2012] Detection parameters:
  Position = (251.4, 333.8) = 2 25 28.35 -3 6 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.3 +/- 8.5
  Background counts = 4.8
  Rate = 0.004 +/- 0.0008

[Thu Mar 22 00:52:34 2012] Off-axis axis estimate = 4.27'
[Thu Mar 22 02:12:10 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 02:12:10 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Thu Mar 22 02:12:10 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Thu Mar 22 02:12:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.56"
[Thu Mar 22 03:07:03 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Mar 22 03:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_src11.csv
[Thu Mar 22 03:07:03 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Mar 22 03:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_src11.csv
[Thu Mar 22 03:07:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 03:07:03 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Mar 22 03:07:03 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Mar 22 03:07:03 2012] Fit fullrun_mos1_xmm0553910201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Mar 22 04:12:12 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.030882 pixels away
[Thu Mar 22 04:12:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 04:12:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 04:12:12 2012] Assessing source extent using major
[Thu Mar 22 04:12:12 2012] Source does appear to be extended
[Thu Mar 22 04:12:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 05:27:14 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 05:27:14 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Thu Mar 22 05:27:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Thu Mar 22 05:27:14 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.56"
[Thu Mar 22 06:13:07 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_src11.ximg exists
[Thu Mar 22 06:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_src11.csv
[Thu Mar 22 06:13:07 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Mar 22 06:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_src11.csv
[Thu Mar 22 06:13:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:13:07 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Mar 22 06:13:07 2012] fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Mar 22 06:13:07 2012] Fit fullrun_mos1_xmm0553910201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Mar 22 07:04:49 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 83.091016 pixels away
[Thu Mar 22 07:04:49 2012] Spatial fit model total counts = 89.998200, observed total counts = 90.000000
[Thu Mar 22 07:04:49 2012] Offset between fit and detection position for source 18 = 0.154245 pixels
[Thu Mar 22 07:04:49 2012] 89.927700 total counts/ 64.488100 bgd. counts: snr = 3.167893
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.154245 pixels
  Position = (251.2, 333.7) = 2 25 28.39 -3 6 19.7
  Extent = 3.4 (2.6-4.7)", rotation angle = 0
  Source counts = 25.4 +/- 9.5
  Background counts = 64.5
  Rate = 0.002 +/- 0.0008
[Thu Mar 22 07:04:49 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 07:04:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 07:04:49 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 07:04:49 2012] Source does appear to be extended
[Thu Mar 22 07:04:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 07:48:14 2012] XMMSAS src. selection expression = ellipse(21808.651000, 28986.178400, 202.576806, 202.576806, 0.000000, X, Y)
[Thu Mar 22 07:48:14 2012] Writing source region out to fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18_src.reg
[Thu Mar 22 07:48:14 2012] Extracting stamp from image fullrun_mos1_xmm0553910201_pi300-10000_cl_sm2.00.img.gz, (240, 322) - (263, 345)
[Thu Mar 22 07:48:14 2012] XMMSAS bgd. selection expression = annulus(21808.651000, 28986.178400, 337.628010, 675.256019, X, Y)
[Thu Mar 22 07:48:14 2012] Writing fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18.gif
[Thu Mar 22 07:51:48 2012] Mean detx,y = (-3215.00, 3422.52) 
[Thu Mar 22 07:51:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 07:52:02 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 07:52:02 2012] Setting source spectrum file to fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar 22 07:52:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Mar 22 07:57:35 2012] Not generating rmf since there are only 25 counts
[Thu Mar 22 07:57:35 2012] rmf not generated due to insufficient counts
[Thu Mar 22 08:17:34 2012] Updating aperture counts using extracted products
[Thu Mar 22 08:17:34 2012] Error reading totcts from fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar 22 08:17:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 08:17:35 2012] Using photon index=1.80, rate=0.00219, arf fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18.arf
[Thu Mar 22 08:17:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 08:17:35 2012] Updating source flux to 3.8e-14
[Thu Mar 22 08:17:41 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Mar 22 08:17:42 2012] xmm0553910201/analysis//spectral/fullrun_mos1_xmm0553910201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete