[Thu Oct  6 02:45:58 2011] Detection parameters:
  Position = (238.3, 309.2) = 12 17 52.83 37 50 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 16.6
  Background counts = 66.2
  Rate = 0.004 +/- 0.0006

[Thu Oct  6 02:45:59 2011] Off-axis axis estimate = 4.43'
[Thu Oct  6 02:51:29 2011] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:51:29 2011] Initial guess for spatial extent in simple fitting = 8.64"
[Thu Oct  6 02:51:29 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Thu Oct  6 02:51:29 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 8.64"
[Thu Oct  6 03:49:33 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src15.ximg exists
[Thu Oct  6 03:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src15.csv
[Thu Oct  6 03:49:33 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Oct  6 03:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src15.csv
[Thu Oct  6 03:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:49:34 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Oct  6 03:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Oct  6 03:49:34 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Oct  6 03:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Oct  6 03:49:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 04:25:24 2011] Source 16 is offset by 6.617006 and -7.116273 pixels which is larger than
2 X fitted extent = 0.784345 x 0.784345, not incorporating fit results
[Thu Oct  6 04:25:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:25:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:25:24 2011] Assessing source extent using major
[Thu Oct  6 04:25:24 2011] Source does appear to be extended
[Thu Oct  6 04:25:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 04:25:41 2011] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 04:25:41 2011] Initial guess for spatial extent in simple fitting = 8.64"
[Thu Oct  6 04:25:41 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Thu Oct  6 04:25:41 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 8.64"
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src15.ximg exists
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Oct  6 05:18:53 2011] Fit fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src15 appears to have run properly
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Oct  6 05:18:54 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Oct  6 05:18:54 2011] Fit fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Oct  6 05:59:04 2011] Spatial fit model total counts = 546.998000, observed total counts = 547.000000
[Thu Oct  6 05:59:04 2011] Offset between fit and detection position for source 16 = 0.317736 pixels
[Thu Oct  6 05:59:04 2011] 543.881000 total counts/ 488.266000 bgd. counts: snr = 2.516887
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.317736 pixels
  Position = (238.4, 309.5) = 12 17 52.82 37 50 57.7
  Extent = 3.7 (2.6-4.9)", rotation angle = 0
  Source counts = 55.6 +/- 23.3
  Background counts = 488.3
  Rate = 0.002 +/- 0.0008
[Thu Oct  6 05:59:04 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 05:59:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 05:59:04 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 05:59:04 2011] Source does appear to be extended
[Thu Oct  6 05:59:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:59:25 2011] XMMSAS src. selection expression = ellipse(20689.773600, 26875.820000, 223.466406, 223.466406, 0.000000, X, Y)
[Thu Oct  6 05:59:25 2011] Writing source region out to fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src16_src.reg
[Thu Oct  6 05:59:25 2011] Extracting stamp from image fullrun_pn_xmm0553880201_pi300-10000_cl_sm2.00.img.gz, (226, 297) - (251, 322)
[Thu Oct  6 05:59:25 2011] XMMSAS bgd. selection expression = annulus(20689.773600, 26875.820000, 372.444011, 744.888021, X, Y)
[Thu Oct  6 05:59:25 2011] Writing fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src16.gif
[Thu Oct  6 06:19:03 2011] Mean detx,y = (2123.19, 5727.16) 
[Thu Oct  6 06:19:08 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 06:19:27 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 06:19:27 2011] Setting source spectrum file to fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Oct  6 06:19:27 2011] Setting bgd. spectrum file to fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Oct  6 06:52:25 2011] Not generating rmf since there are only 55 counts
[Thu Oct  6 06:52:25 2011] rmf not generated due to insufficient counts
[Thu Oct  6 07:49:15 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:49:15 2011] Error reading totcts from fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Oct  6 07:49:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:49:15 2011] Using photon index=1.80, rate=0.00181, arf fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src16.arf
[Thu Oct  6 07:49:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:49:15 2011] Updating source flux to 7.8e-15
[Thu Oct  6 07:50:04 2011] Flag b found in src. 16 procflags, skipping spectral fitting
[Thu Oct  6 07:50:04 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting