[Thu Oct  6 02:45:57 2011] Detection parameters:
  Position = (273.9, 333.0) = 12 17 39.79 37 52 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 567.7 +/- 31.0
  Background counts = 70.1
  Rate = 0.02 +/- 0.001

[Thu Oct  6 02:45:59 2011] Off-axis axis estimate = 3.07'
[Thu Oct  6 02:51:29 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:51:29 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Thu Oct  6 02:51:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.736
[Thu Oct  6 02:51:29 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.97"
[Thu Oct  6 03:49:33 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src13.ximg exists
[Thu Oct  6 03:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 03:49:33 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Oct  6 03:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 03:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:49:34 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Oct  6 03:49:34 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Oct  6 03:49:34 2011] Fit fullrun_pn_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Oct  6 04:25:24 2011] Source 13 is offset by 7.188108 and 6.317015 pixels which is larger than
2 X fitted extent = 0.915591 x 0.915591, not incorporating fit results
[Thu Oct  6 04:25:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:25:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:25:24 2011] Assessing source extent using major
[Thu Oct  6 04:25:24 2011] Source does appear to be extended
[Thu Oct  6 04:25:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 04:25:41 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 04:25:41 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Thu Oct  6 04:25:41 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.736
[Thu Oct  6 04:25:41 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 7.97"
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src13.ximg exists
[Thu Oct  6 05:18:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src13.csv
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Oct  6 05:18:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src13.csv
[Thu Oct  6 05:18:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Oct  6 05:18:53 2011] fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Oct  6 05:18:53 2011] Fit fullrun_pn_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Oct  6 05:59:04 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 59.130170 pixels away
[Thu Oct  6 05:59:04 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 59.000438 pixels away
[Thu Oct  6 05:59:04 2011] Spatial fit model total counts = 866.986000, observed total counts = 867.000000
[Thu Oct  6 05:59:04 2011] Offset between fit and detection position for source 13 = 0.209184 pixels
[Thu Oct  6 05:59:04 2011] 851.536000 total counts/ 489.516000 bgd. counts: snr = 16.362480
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.209184 pixels
  Position = (273.7, 333.0) = 12 17 39.87 37 52 40.1
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 362.0 +/- 29.2
  Background counts = 489.5
  Rate = 0.01 +/- 0.0009
[Thu Oct  6 05:59:04 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 05:59:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 05:59:04 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 05:59:04 2011] Source does appear to be extended
[Thu Oct  6 05:59:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:59:25 2011] XMMSAS src. selection expression = ellipse(23759.427200, 28921.146800, 303.022209, 303.022209, 0.000000, X, Y)
[Thu Oct  6 05:59:25 2011] Writing source region out to fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src13_src.reg
[Thu Oct  6 05:59:25 2011] Extracting stamp from image fullrun_pn_xmm0553880201_pi300-10000_cl_sm2.00.img.gz, (256, 316) - (291, 350)
[Thu Oct  6 05:59:25 2011] XMMSAS bgd. selection expression = annulus(23759.427200, 28921.146800, 505.037015, 1010.074029, X, Y)
[Thu Oct  6 05:59:25 2011] Writing fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src13.gif
[Thu Oct  6 06:16:23 2011] Mean detx,y = (-1522.12, 5141.90) 
[Thu Oct  6 06:16:29 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 06:16:51 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 06:16:52 2011] Setting source spectrum file to fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Oct  6 06:16:52 2011] Setting bgd. spectrum file to fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Oct  6 07:49:15 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:49:15 2011] Error reading totcts from fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Oct  6 07:49:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:49:15 2011] Using photon index=1.80, rate=0.0118, arf fullrun_pn_xmm0553880201_pi300-10000_pass1_cl_src13.arf
[Thu Oct  6 07:49:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:49:15 2011] Updating source flux to 4.3e-14
[Thu Oct  6 07:50:04 2011] Flag b found in src. 13 procflags, skipping spectral fitting