[Thu Oct  6 02:47:04 2011] Detection parameters:
  Position = (404.5, 360.2) = 12 16 51.76 37 54 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3273.2 +/- 68.3
  Background counts = 49.2
  Rate = 0.08 +/- 0.002

[Thu Oct  6 02:47:04 2011] Off-axis axis estimate = 8.90'
[Thu Oct  6 04:09:03 2011] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 04:09:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 04:09:03 2011] Initial guess for spatial extent in simple fitting = 10.88"
[Thu Oct  6 04:09:03 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Thu Oct  6 04:09:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.88"
[Thu Oct  6 04:25:13 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Oct  6 04:25:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 04:25:13 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Oct  6 04:25:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 04:25:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 04:25:13 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 04:25:13 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 04:25:13 2011] Fit fullrun_mos2_xmm0553880201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 04:25:29 2011] Spatial fit model total counts = 3042.010000, observed total counts = 3042.000000
[Thu Oct  6 04:25:29 2011] Offset between fit and detection position for source 3 = 0.351081 pixels
[Thu Oct  6 04:25:29 2011] 3038.842000 total counts/ 742.912000 bgd. counts: snr = 84.234491
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.351081 pixels
  Position = (404.2, 360.3) = 12 16 51.89 37 54 38.5
  Extent = 6.7 (6.5-7.0)", rotation angle = 0
  Source counts = 2295.9 +/- 55.1
  Background counts = 742.9
  Rate = 0.06 +/- 0.002
[Thu Oct  6 04:25:29 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:25:29 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 04:25:29 2011] Source does appear to be extended
[Thu Oct  6 04:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:42:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 05:42:59 2011] Initial guess for spatial extent in simple fitting = 6.75"
[Thu Oct  6 05:42:59 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.951
[Thu Oct  6 05:42:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.75"
[Thu Oct  6 05:58:53 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Oct  6 05:58:53 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Oct  6 05:58:53 2011] Fit fullrun_mos2_xmm0553880201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Oct  6 05:58:53 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 05:58:53 2011] fullrun_mos2_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 05:58:53 2011] Fit fullrun_mos2_xmm0553880201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 05:59:12 2011] Spatial fit model total counts = 2881.000000, observed total counts = 2881.000000
[Thu Oct  6 05:59:12 2011] Offset between fit and detection position for source 3 = 0.010305 pixels
[Thu Oct  6 05:59:12 2011] 2883.541000 total counts/ 683.921000 bgd. counts: snr = 84.109430
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.010305 pixels
  Position = (404.2, 360.3) = 12 16 51.89 37 54 38.5
  Extent = 6.4 (6.2-6.6)", rotation angle = 0
  Source counts = 2199.6 +/- 53.7
  Background counts = 683.9
  Rate = 0.06 +/- 0.002
[Thu Oct  6 05:59:12 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 05:59:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 05:59:12 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 05:59:12 2011] Source does appear to be extended
[Thu Oct  6 05:59:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 07:39:44 2011] Counts = 2199.620000, rescaling region sizes by 2.000000
[Thu Oct  6 07:39:44 2011] XMMSAS src. selection expression = ellipse(35116.813100, 31298.310800, 766.948822, 766.948822, 0.000000, X, Y)
[Thu Oct  6 07:39:44 2011] Writing source region out to fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3_src.reg
[Thu Oct  6 07:39:44 2011] Extracting stamp from image fullrun_mos2_xmm0553880201_pi300-10000_cl_sm2.00.img.gz, (360, 316) - (448, 404)
[Thu Oct  6 07:39:44 2011] XMMSAS bgd. selection expression = annulus(35116.813100, 31298.310800, 2556.496074, 5112.992147, X, Y)
[Thu Oct  6 07:39:44 2011] Writing fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3.gif
[Thu Oct  6 07:39:50 2011] Mean detx,y = (11609.96, 593.79) 
[Thu Oct  6 07:39:53 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 07:40:16 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 07:40:16 2011] Setting source spectrum file to fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Oct  6 07:40:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Oct  6 07:49:16 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:49:16 2011] Error reading totcts from fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Oct  6 07:49:16 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:49:16 2011] Using photon index=1.80, rate=0.0619, arf fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3.arf
[Thu Oct  6 07:49:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:49:16 2011] Updating source flux to 1.3e-12
[Thu Oct  6 07:50:04 2011] Reading fit data from xmm0553880201/analysis//spectral/fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3_pl.csv
[Thu Oct  6 07:50:04 2011] Spectral fit parameter nH value = 2.10621e+20
[Thu Oct  6 07:50:04 2011] Spectral fit parameter PhoIndex value = 2.26483
[Thu Oct  6 07:50:04 2011] Failed to get F(0.3-8.0) from xmm0553880201/analysis//spectral/fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 07:50:04 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:50:04 2011] Using Nh = 2.1e+20, photon index=2.26, rate=0.0619, arf fullrun_mos2_xmm0553880201_pi300-10000_pass1_cl_src3.arf
[Thu Oct  6 07:50:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:50:04 2011] Updating source flux to 1.1e-12