[Sat Jun 15 01:43:29 2013] Detection parameters:
  Position = (328.0, 341.6) = 23 25 18.44 28 31 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.0 +/- 28.8
  Background counts = 297.3
  Rate = 0.004 +/- 0.0005

[Sat Jun 15 01:43:30 2013] Off-axis axis estimate = 3.79'
[Sat Jun 15 01:52:50 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 01:52:50 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Sat Jun 15 01:52:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.858
[Sat Jun 15 01:52:50 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.32"
[Sat Jun 15 03:22:34 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jun 15 03:22:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_src26.csv
[Sat Jun 15 03:22:34 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jun 15 03:22:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_src26.csv
[Sat Jun 15 03:22:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:22:35 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jun 15 03:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun 15 03:22:35 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jun 15 03:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun 15 03:22:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:24 2013] Warning, spatial fit 26 centroid is now closest to src. 32
[Sat Jun 15 05:28:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:24 2013] Assessing source extent using major
[Sat Jun 15 05:28:24 2013] Source does appear to be extended
[Sat Jun 15 05:28:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 05:28:58 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:28:58 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Sat Jun 15 05:28:58 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.858
[Sat Jun 15 05:28:58 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 8.32"
[Sat Jun 15 06:39:58 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass1_src26.ximg exists
[Sat Jun 15 06:39:58 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Jun 15 06:39:58 2013] Fit fullrun_pn_xmm0553870101_pi300-10000_cl_pass1_src26 appears to have run properly
[Sat Jun 15 06:39:59 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Jun 15 06:39:59 2013] fullrun_pn_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Jun 15 06:39:59 2013] Fit fullrun_pn_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Jun 15 08:39:02 2013] Spatial fit model total counts = 1009.730000, observed total counts = 937.000000
[Sat Jun 15 08:39:02 2013] Offset between fit and detection position for source 27 = 0.459968 pixels
[Sat Jun 15 08:39:02 2013] 1002.933000 total counts/ 876.255000 bgd. counts: snr = 4.279430
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.459968 pixels
  Position = (327.5, 341.8) = 23 25 18.58 28 31 55.2
  Extent = 5.4 (4.6-6.9)", rotation angle = 0
  Source counts = 126.7 +/- 31.7
  Background counts = 876.3
  Rate = 0.002 +/- 0.0006
[Sat Jun 15 08:39:02 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:02 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:39:02 2013] Source does appear to be extended
[Sat Jun 15 08:39:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:39:38 2013] XMMSAS src. selection expression = ellipse(28447.332400, 29684.707200, 326.296809, 326.296809, 0.000000, X, Y)
[Sat Jun 15 08:39:38 2013] Writing source region out to fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun 15 08:39:38 2013] Extracting stamp from image fullrun_pn_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (309, 323) - (346, 361)
[Sat Jun 15 08:39:38 2013] XMMSAS bgd. selection expression = annulus(28447.332400, 29684.707200, 543.828016, 1087.656031, X, Y) && !ellipse(27523.697815, 30948.213013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29438.605835, 29184.123932, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 08:39:38 2013] Writing fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27.gif
[Sat Jun 15 09:06:47 2013] Mean detx,y = (-102.71, -2953.12) 
[Sat Jun 15 09:06:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 09:07:03 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 09:07:03 2013] Setting source spectrum file to fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jun 15 09:07:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun 15 11:42:13 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:13 2013] Total counts from fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 283.00
[Sat Jun 15 11:42:14 2013] Total counts from fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 714.00
[Sat Jun 15 11:42:14 2013] Got source and background scale factors 332800.000000, 1661498.000000
[Sat Jun 15 11:42:14 2013] User source parameters:
  Position = (327.5, 341.8) = 23 25 18.58 28 31 55.2
  Extent = 5.4 (4.6-6.9)", rotation angle = 0
  Source aperture counts = 140.0 +/- 17.8
  Background aperture counts = 143.0
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 11:42:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:20 2013] Using photon index=1.80, rate=0.00226, arf fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27.arf
[Sat Jun 15 11:42:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:20 2013] Updating source flux to 9.4e-15
[Sat Jun 15 11:42:57 2013] xmm0553870101/analysis//spectral/fullrun_pn_xmm0553870101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete