[Sat Jun 15 01:45:01 2013] Detection parameters:
  Position = (197.1, 227.4) = 23 26 1.61 28 23 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.7 +/- 13.9
  Background counts = 46.6
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 01:45:02 2013] Off-axis axis estimate = 8.97'
[Sat Jun 15 04:16:59 2013] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:16:59 2013] Initial guess for spatial extent in simple fitting = 10.92"
[Sat Jun 15 04:16:59 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Sat Jun 15 04:16:59 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 10.92"
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src46.ximg exists
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src46_1.ximg exists
[Sat Jun 15 05:28:10 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src46 appears to have run properly
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sat Jun 15 05:28:10 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Sat Jun 15 05:28:43 2013] Spatial fit model total counts = 435.188000, observed total counts = 435.000000
[Sat Jun 15 05:28:43 2013] Offset between fit and detection position for source 42 = 0.124876 pixels
[Sat Jun 15 05:28:43 2013] 431.340900 total counts/ 391.313000 bgd. counts: snr = 2.023488
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.124876 pixels
  Position = (197.1, 227.3) = 23 26 1.58 28 23 37.1
  Extent = 2.9 (2.7-4.6)", rotation angle = 33
  Source counts = 40.0 +/- 20.8
  Background counts = 391.3
  Rate = 0.0005 +/- 0.0003
[Sat Jun 15 05:28:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:43 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 05:28:43 2013] Source does appear to be extended
[Sat Jun 15 05:28:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.70
[Sat Jun 15 07:32:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:32:29 2013] Initial guess for spatial extent in simple fitting = 2.83"
[Sat Jun 15 07:32:29 2013] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.754
[Sat Jun 15 07:32:29 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 2.83"
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src46.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src46.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src46_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src46.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:18 2013] Spatial fit model total counts = 237.002000, observed total counts = 435.000000
[Sat Jun 15 08:39:18 2013] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 08:39:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:18 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:39:18 2013] Source does appear to be extended
[Sat Jun 15 08:39:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.70
[Sat Jun 15 10:46:45 2013] XMMSAS src. selection expression = ellipse(17103.496620, 19726.897200, 176.436005, 163.734005, 33.313667, X, Y)
[Sat Jun 15 10:46:45 2013] Writing source region out to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42_src.reg
[Sat Jun 15 10:46:45 2013] Extracting stamp from image fullrun_mos2_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (187, 217) - (207, 237)
[Sat Jun 15 10:46:45 2013] XMMSAS bgd. selection expression = annulus(17103.496620, 19726.897200, 294.060008, 588.120017, X, Y)
[Sat Jun 15 10:46:45 2013] Writing fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42.gif
[Sat Jun 15 11:02:49 2013] Mean detx,y = (6990.19, -10711.92) 
[Sat Jun 15 11:02:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 11:02:57 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 11:02:57 2013] Setting source spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Jun 15 11:02:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sat Jun 15 11:39:24 2013] Not generating rmf since there are only 40 counts
[Sat Jun 15 11:39:24 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:37 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:37 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 59.00
[Sat Jun 15 11:42:37 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 159.00
[Sat Jun 15 11:42:37 2013] Got source and background scale factors 92800.000000, 816000.000000
[Sat Jun 15 11:42:37 2013] User source parameters:
  Position = (197.1, 227.3) = 23 26 1.58 28 23 37.1
  Extent = 2.9 (2.7-4.6)", rotation angle = 33
  Source aperture counts = 40.9 +/- 8.7
  Background aperture counts = 18.1
  Rate = 0.0005 +/- 0.0001

[Sat Jun 15 11:42:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:39 2013] Using photon index=1.80, rate=0.000516, arf fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42.arf
[Sat Jun 15 11:42:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:39 2013] Updating source flux to 2.5e-14
[Sat Jun 15 11:42:46 2013] Flag p found in src. 42 procflags, skipping spectral fitting
[Sat Jun 15 11:42:46 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 11:42:51 2013] xmm0553870101/analysis//spectral/fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete