[Sat Jun 15 01:45:01 2013] Detection parameters:
  Position = (220.5, 289.1) = 23 25 53.90 28 28 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.1 +/- 20.0
  Background counts = 51.5
  Rate = 0.004 +/- 0.0004

[Sat Jun 15 01:45:02 2013] Off-axis axis estimate = 5.69'
[Sat Jun 15 04:16:59 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:16:59 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Sat Jun 15 04:16:59 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Sat Jun 15 04:16:59 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.27"
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 15 05:28:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 15 05:28:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 05:28:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 05:28:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:43 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.048934 pixels away
[Sat Jun 15 05:28:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:43 2013] Assessing source extent using major
[Sat Jun 15 05:28:43 2013] Source does appear to be extended
[Sat Jun 15 05:28:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 07:32:29 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:32:29 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Sat Jun 15 07:32:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Sat Jun 15 07:32:29 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 9.27"
[Sat Jun 15 08:38:49 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 15 08:38:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 08:38:49 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 15 08:38:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 08:38:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:18 2013] Spatial fit model total counts = 665.241000, observed total counts = 592.000000
[Sat Jun 15 08:39:18 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 08:39:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:18 2013] Assessing source extent using major
[Sat Jun 15 08:39:18 2013] Source does appear to be extended
[Sat Jun 15 08:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:46:44 2013] XMMSAS src. selection expression = ellipse(19135.005310, 25100.038391, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:46:44 2013] Writing source region out to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32_src.reg
[Sat Jun 15 10:46:44 2013] Extracting stamp from image fullrun_mos2_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (183, 252) - (258, 327)
[Sat Jun 15 10:46:44 2013] XMMSAS bgd. selection expression = annulus(19135.005310, 25100.038391, 1087.500000, 2175.000000, X, Y) && !ellipse(21162.462677, 27636.998535, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:46:44 2013] Writing fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32.gif
[Sat Jun 15 10:48:46 2013] Mean detx,y = (7198.24, -4961.54) 
[Sat Jun 15 10:48:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:49:19 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:49:19 2013] Setting source spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Jun 15 10:49:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Jun 15 11:16:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 11:16:16 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:29 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:29 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 442.00
[Sat Jun 15 11:42:29 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 2123.00
[Sat Jun 15 11:42:29 2013] Got source and background scale factors 1139770.000000, 9798344.000000
[Sat Jun 15 11:42:30 2013] User source parameters:
  Position = (220.5, 289.1) = 23 25 53.90 28 28 6.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 195.0 +/- 22.0
  Background aperture counts = 247.0
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 11:42:30 2013] Updating counts from extracted products
[Sat Jun 15 11:42:30 2013] Set source signif. to 195.05/15.71 = 12.41
[Sat Jun 15 11:42:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:38 2013] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32.arf
[Sat Jun 15 11:42:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:38 2013] Updating source flux to 4.3e-14
[Sat Jun 15 11:42:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 11:42:51 2013] xmm0553870101/analysis//spectral/fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete