[Sat Jun 15 01:45:01 2013] Detection parameters:
  Position = (322.9, 288.8) = 23 25 20.11 28 28 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 17.1
  Background counts = 59.2
  Rate = 0.002 +/- 0.0002

[Sat Jun 15 01:45:02 2013] Off-axis axis estimate = 1.91'
[Sat Jun 15 04:16:59 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:16:59 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Sat Jun 15 04:16:59 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Sat Jun 15 04:16:59 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.38"
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun 15 05:28:09 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src28 appears to have run properly
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun 15 05:28:10 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Jun 15 05:28:43 2013] Spatial fit model total counts = 596.717000, observed total counts = 553.000000
[Sat Jun 15 05:28:43 2013] Offset between fit and detection position for source 31 = 0.070065 pixels
[Sat Jun 15 05:28:43 2013] 603.077700 total counts/ 523.401000 bgd. counts: snr = 3.482684
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.070065 pixels
  Position = (323.0, 288.8) = 23 25 20.10 28 28 4.6
  Extent = 4.4 (3.4-5.4)", rotation angle = 0
  Source counts = 79.7 +/- 24.6
  Background counts = 523.4
  Rate = 0.001 +/- 0.0003
[Sat Jun 15 05:28:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:43 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 05:28:43 2013] Source does appear to be extended
[Sat Jun 15 05:28:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 07:32:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:32:29 2013] Initial guess for spatial extent in simple fitting = 4.40"
[Sat Jun 15 07:32:29 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.985
[Sat Jun 15 07:32:29 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 4.40"
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src28.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src28.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:18 2013] Warning, spatial fit 28 centroid is now closest to src. 21
[Sat Jun 15 08:39:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:18 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:39:18 2013] Source does appear to be extended
[Sat Jun 15 08:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:46:44 2013] XMMSAS src. selection expression = ellipse(28049.264060, 25072.789600, 264.063608, 264.063608, 0.000000, X, Y)
[Sat Jun 15 10:46:44 2013] Writing source region out to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun 15 10:46:44 2013] Extracting stamp from image fullrun_mos2_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (308, 274) - (338, 304)
[Sat Jun 15 10:46:44 2013] XMMSAS bgd. selection expression = annulus(28049.264060, 25072.789600, 440.106013, 880.212025, X, Y)
[Sat Jun 15 10:46:44 2013] Writing fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31.gif
[Sat Jun 15 10:56:52 2013] Mean detx,y = (-1102.26, -1601.98) 
[Sat Jun 15 10:56:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:57:01 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:57:01 2013] Setting source spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun 15 10:57:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun 15 11:37:34 2013] Not generating rmf since there are only 79 counts
[Sat Jun 15 11:37:34 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:33 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:33 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 136.00
[Sat Jun 15 11:42:33 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 409.00
[Sat Jun 15 11:42:33 2013] Got source and background scale factors 217600.000000, 1624216.000000
[Sat Jun 15 11:42:33 2013] User source parameters:
  Position = (323.0, 288.8) = 23 25 20.10 28 28 4.6
  Extent = 4.4 (3.4-5.4)", rotation angle = 0
  Source aperture counts = 81.2 +/- 12.7
  Background aperture counts = 54.8
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 11:42:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:38 2013] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31.arf
[Sat Jun 15 11:42:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:38 2013] Updating source flux to 1.3e-14
[Sat Jun 15 11:42:46 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 11:42:51 2013] xmm0553870101/analysis//spectral/fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete