[Sat Jun 15 01:45:01 2013] Detection parameters:
  Position = (318.2, 311.1) = 23 25 21.67 28 29 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 509.9 +/- 29.8
  Background counts = 58.8
  Rate = 0.007 +/- 0.0004

[Sat Jun 15 01:45:02 2013] Off-axis axis estimate = 1.70'
[Sat Jun 15 04:16:59 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:16:59 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jun 15 04:16:59 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Jun 15 04:16:59 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.28"
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 05:28:09 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src3 appears to have run properly
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 05:28:10 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 15 05:28:43 2013] Spatial fit model total counts = 1006.020000, observed total counts = 967.000000
[Sat Jun 15 05:28:43 2013] Offset between fit and detection position for source 28 = 0.313105 pixels
[Sat Jun 15 05:28:43 2013] 1016.871000 total counts/ 618.686000 bgd. counts: snr = 16.008467
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.313105 pixels
  Position = (317.9, 311.3) = 23 25 21.77 28 29 42.7
  Extent = 8.1 (7.2-9.2)" x 5.6 (4.8-6.4)", rotation angle = 36 (22-50) degrees
  Source counts = 398.2 +/- 31.9
  Background counts = 618.7
  Rate = 0.005 +/- 0.0004
[Sat Jun 15 05:28:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:43 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 05:28:43 2013] Source does appear to be extended
[Sat Jun 15 05:28:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Sat Jun 15 07:32:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:32:29 2013] Initial guess for spatial extent in simple fitting = 6.87"
[Sat Jun 15 07:32:29 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.925
[Sat Jun 15 07:32:29 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.87"
[Sat Jun 15 08:38:49 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 15 08:38:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 08:38:49 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 15 08:38:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 08:38:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:18 2013] Warning, spatial fit 3 centroid is now closest to src. 21
[Sat Jun 15 08:39:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:18 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:39:18 2013] Source does appear to be extended
[Sat Jun 15 08:39:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Sat Jun 15 10:46:44 2013] XMMSAS src. selection expression = ellipse(27608.617440, 27033.267800, 487.504214, 336.913810, 35.502993, X, Y)
[Sat Jun 15 10:46:44 2013] Writing source region out to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun 15 10:46:44 2013] Extracting stamp from image fullrun_mos2_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (290, 283) - (346, 339)
[Sat Jun 15 10:46:44 2013] XMMSAS bgd. selection expression = annulus(27608.617440, 27033.267800, 812.507023, 1625.014047, X, Y) && !ellipse(29448.647156, 29177.720001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.264060, 25072.789600, 352.084810, 352.084810, 0.000000, X, Y)
[Sat Jun 15 10:46:44 2013] Writing fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28.gif
[Sat Jun 15 10:47:31 2013] Mean detx,y = (46.61, 58.33) 
[Sat Jun 15 10:47:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:47:41 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:47:41 2013] Setting source spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun 15 10:47:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun 15 11:42:29 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:29 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 566.00
[Sat Jun 15 11:42:29 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1471.00
[Sat Jun 15 11:42:29 2013] Got source and background scale factors 513600.000000, 5904856.000000
[Sat Jun 15 11:42:29 2013] User source parameters:
  Position = (317.9, 311.3) = 23 25 21.77 28 29 42.7
  Extent = 8.1 (7.2-9.2)" x 5.6 (4.8-6.4)", rotation angle = 36 (22-50) degrees
  Source aperture counts = 438.1 +/- 24.8
  Background aperture counts = 127.9
  Rate = 0.006 +/- 0.0003

[Sat Jun 15 11:42:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:38 2013] Using photon index=1.80, rate=0.00514, arf fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28.arf
[Sat Jun 15 11:42:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:38 2013] Updating source flux to 6.5e-14
[Sat Jun 15 11:42:51 2013] xmm0553870101/analysis//spectral/fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete