[Sat Jun 15 01:45:00 2013] Detection parameters:
  Position = (339.0, 335.9) = 23 25 14.78 28 31 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.0 +/- 20.5
  Background counts = 57.8
  Rate = 0.004 +/- 0.0003

[Sat Jun 15 01:45:02 2013] Off-axis axis estimate = 4.01'
[Sat Jun 15 04:16:59 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:16:59 2013] Initial guess for spatial extent in simple fitting = 8.43"
[Sat Jun 15 04:16:59 2013] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.715
[Sat Jun 15 04:16:59 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.43"
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 15 05:28:09 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 15 05:28:09 2013] Fit fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src10 appears to have run properly
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 15 05:28:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:43 2013] Spatial fit model total counts = 661.206000, observed total counts = 598.000000
[Sat Jun 15 05:28:43 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 05:28:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:43 2013] Assessing source extent using major
[Sat Jun 15 05:28:43 2013] Source does appear to be extended
[Sat Jun 15 05:28:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 07:32:29 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:32:29 2013] Initial guess for spatial extent in simple fitting = 8.43"
[Sat Jun 15 07:32:29 2013] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.715
[Sat Jun 15 07:32:29 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.43"
[Sat Jun 15 08:38:49 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 15 08:38:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 08:38:49 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 15 08:38:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 08:38:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:18 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 32.544981 pixels away
[Sat Jun 15 08:39:18 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.203223 pixels away
[Sat Jun 15 08:39:18 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 48.073565 pixels away
[Sat Jun 15 08:39:18 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.978711 pixels away
[Sat Jun 15 08:39:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:18 2013] Assessing source extent using major
[Sat Jun 15 08:39:18 2013] Source does appear to be extended
[Sat Jun 15 08:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:46:44 2013] XMMSAS src. selection expression = ellipse(29448.647156, 29177.720001, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:46:44 2013] Writing source region out to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21_src.reg
[Sat Jun 15 10:46:44 2013] Extracting stamp from image fullrun_mos2_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (302, 298) - (377, 373)
[Sat Jun 15 10:46:44 2013] XMMSAS bgd. selection expression = annulus(29448.647156, 29177.720001, 1087.500000, 2175.000000, X, Y) && !ellipse(27608.617440, 27033.267800, 650.005619, 449.218413, 35.502993, X, Y) && !ellipse(27517.168600, 30932.161600, 314.779209, 314.779209, 0.000000, X, Y) && !ellipse(28473.148040, 29689.058880, 302.027209, 302.027209, 0.000000, X, Y)
[Sat Jun 15 10:46:44 2013] Writing fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21.gif
[Sat Jun 15 10:50:41 2013] Mean detx,y = (-862.01, 2717.58) 
[Sat Jun 15 10:50:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:50:58 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:50:58 2013] Setting source spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Jun 15 10:50:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jun 15 11:20:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 11:20:22 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:30 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:30 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 462.00
[Sat Jun 15 11:42:30 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 2637.00
[Sat Jun 15 11:42:30 2013] Got source and background scale factors 1131900.000000, 10590064.000000
[Sat Jun 15 11:42:30 2013] User source parameters:
  Position = (339.0, 335.9) = 23 25 14.78 28 31 31.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 180.1 +/- 22.5
  Background aperture counts = 281.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 11:42:30 2013] Updating counts from extracted products
[Sat Jun 15 11:42:30 2013] Set source signif. to 180.15/16.79 = 10.73
[Sat Jun 15 11:42:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:38 2013] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21.arf
[Sat Jun 15 11:42:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:38 2013] Updating source flux to 3e-14
[Sat Jun 15 11:42:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 11:42:51 2013] xmm0553870101/analysis//spectral/fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete