[Sat Jun 15 01:44:59 2013] Detection parameters:
  Position = (393.0, 486.5) = 23 24 56.94 28 42 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 12.0
  Background counts = 36.2
  Rate = 0.0008 +/- 0.0002

[Sat Jun 15 01:45:02 2013] Off-axis axis estimate = 15.26'
[Sat Jun 15 04:16:59 2013] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:16:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 04:16:59 2013] Initial guess for spatial extent in simple fitting = 14.06"
[Sat Jun 15 04:16:59 2013] source mask rpix=3.2, npix_max = 55, mask sum = 42, frac = 0.754
[Sat Jun 15 04:16:59 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 14.06"
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src48.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src48.csv
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src48.csv
[Sat Jun 15 05:28:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sat Jun 15 05:28:10 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sat Jun 15 05:28:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sat Jun 15 05:28:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:43 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.846228 pixels away
[Sat Jun 15 05:28:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:43 2013] Assessing source extent using major
[Sat Jun 15 05:28:43 2013] Source does appear to be extended
[Sat Jun 15 05:28:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 07:32:29 2013] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:32:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 07:32:29 2013] Initial guess for spatial extent in simple fitting = 14.06"
[Sat Jun 15 07:32:29 2013] source mask rpix=3.2, npix_max = 55, mask sum = 42, frac = 0.754
[Sat Jun 15 07:32:29 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 14.06"
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src48.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src48.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src48.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 15 08:38:50 2013] fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Jun 15 08:38:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 15 08:38:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:18 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.645466 pixels away
[Sat Jun 15 08:39:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:18 2013] Assessing source extent using major
[Sat Jun 15 08:39:18 2013] Source does appear to be extended
[Sat Jun 15 08:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:46:45 2013] XMMSAS src. selection expression = ellipse(34138.443115, 42280.995819, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:46:45 2013] Writing source region out to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 15 10:46:45 2013] Extracting stamp from image fullrun_mos2_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (355, 449) - (430, 524)
[Sat Jun 15 10:46:45 2013] XMMSAS bgd. selection expression = annulus(34138.443115, 42280.995819, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 10:46:45 2013] Writing fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 15 11:03:59 2013] Mean detx,y = (-273.04, 16467.71) 
[Sat Jun 15 11:04:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 11:04:23 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 11:04:23 2013] Setting source spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 15 11:04:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 15 11:39:53 2013] Not generating rmf since there are only 63 counts
[Sat Jun 15 11:39:53 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:38 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:38 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 200.00
[Sat Jun 15 11:42:38 2013] Total counts from fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1327.00
[Sat Jun 15 11:42:38 2013] Got source and background scale factors 669938.000000, 5126539.000000
[Sat Jun 15 11:42:38 2013] User source parameters:
  Position = (393.0, 486.5) = 23 24 56.94 28 42 25.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 26.6 +/- 15.2
  Background aperture counts = 173.4
  Rate = 0.0003 +/- 0.0002

[Sat Jun 15 11:42:38 2013] Updating counts from extracted products
[Sat Jun 15 11:42:38 2013] Set source signif. to 26.59/13.17 = 2.02
[Sat Jun 15 11:42:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:39 2013] Using photon index=1.80, rate=0.000343, arf fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 15 11:42:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:39 2013] Updating source flux to 1.6e-14
[Sat Jun 15 11:42:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 11:42:51 2013] xmm0553870101/analysis//spectral/fullrun_mos2_xmm0553870101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete