[Sat Jun 15 01:44:09 2013] Detection parameters:
  Position = (322.8, 289.2) = 23 25 20.15 28 28 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.0 +/- 16.6
  Background counts = 73.7
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 01:44:10 2013] Off-axis axis estimate = 1.89'
[Sat Jun 15 03:22:36 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:22:36 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Sat Jun 15 03:22:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Sat Jun 15 03:22:36 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.37"
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 04:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 15 04:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:34 2013] Source 37 is offset by 1.272535 and -5.258466 pixels which is larger than
2 X fitted extent = 3.124793 x 3.124793, not incorporating fit results
[Sat Jun 15 05:28:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:35 2013] Assessing source extent using major
[Sat Jun 15 05:28:35 2013] Source does appear to be extended
[Sat Jun 15 05:28:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 06:39:59 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 06:39:59 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Sat Jun 15 06:39:59 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Sat Jun 15 06:39:59 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 7.37"
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jun 15 07:32:28 2013] Fit fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src30 appears to have run properly
[Sat Jun 15 07:32:29 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jun 15 07:32:29 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jun 15 07:32:29 2013] Fit fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Jun 15 08:39:10 2013] Spatial fit model total counts = 611.993000, observed total counts = 612.000000
[Sat Jun 15 08:39:10 2013] Offset between fit and detection position for source 37 = 0.313897 pixels
[Sat Jun 15 08:39:10 2013] 611.171000 total counts/ 567.703000 bgd. counts: snr = 1.824354
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.313897 pixels
  Position = (322.9, 288.9) = 23 25 20.11 28 28 5.1
  Extent = 3.1 (2.3-4.7)", rotation angle = 0
  Source counts = 43.5 +/- 24.7
  Background counts = 567.7
  Rate = 0.0006 +/- 0.0003
[Sat Jun 15 08:39:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:10 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:39:10 2013] Source does appear to be extended
[Sat Jun 15 08:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:06:56 2013] XMMSAS src. selection expression = ellipse(28046.440400, 25082.099800, 187.781405, 187.781405, 0.000000, X, Y)
[Sat Jun 15 10:06:56 2013] Writing source region out to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37_src.reg
[Sat Jun 15 10:06:56 2013] Extracting stamp from image fullrun_mos1_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (312, 278) - (334, 300)
[Sat Jun 15 10:06:56 2013] XMMSAS bgd. selection expression = annulus(28046.440400, 25082.099800, 312.969009, 625.938018, X, Y)
[Sat Jun 15 10:06:56 2013] Writing fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37.gif
[Sat Jun 15 10:19:59 2013] Mean detx,y = (-1381.74, 918.35) 
[Sat Jun 15 10:20:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:20:08 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:20:08 2013] Setting source spectrum file to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jun 15 10:20:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Jun 15 10:45:24 2013] Not generating rmf since there are only 43 counts
[Sat Jun 15 10:45:24 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:26 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:26 2013] Total counts from fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 72.00
[Sat Jun 15 11:42:26 2013] Total counts from fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 262.00
[Sat Jun 15 11:42:26 2013] Got source and background scale factors 113600.000000, 928000.000000
[Sat Jun 15 11:42:26 2013] User source parameters:
  Position = (322.9, 288.9) = 23 25 20.11 28 28 5.1
  Extent = 3.1 (2.3-4.7)", rotation angle = 0
  Source aperture counts = 39.9 +/- 9.5
  Background aperture counts = 32.1
  Rate = 0.0005 +/- 0.0001

[Sat Jun 15 11:42:28 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:28 2013] Using photon index=1.80, rate=0.000571, arf fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37.arf
[Sat Jun 15 11:42:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:28 2013] Updating source flux to 9.3e-15
[Sat Jun 15 11:42:41 2013] Flag b found in src. 37 procflags, skipping spectral fitting
[Sat Jun 15 11:42:41 2013] Source 37 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 11:42:46 2013] xmm0553870101/analysis//spectral/fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete