[Sat Jun 15 01:44:09 2013] Detection parameters:
  Position = (220.5, 289.1) = 23 25 53.91 28 28 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.5 +/- 20.6
  Background counts = 63.0
  Rate = 0.005 +/- 0.0004

[Sat Jun 15 01:44:10 2013] Off-axis axis estimate = 5.69'
[Sat Jun 15 03:22:36 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:22:36 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Sat Jun 15 03:22:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.082
[Sat Jun 15 03:22:36 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.28"
[Sat Jun 15 04:16:57 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 15 04:16:57 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 15 04:16:57 2013] Fit fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 15 04:16:58 2013] Fit fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 15 05:28:34 2013] Spatial fit model total counts = 629.957000, observed total counts = 601.000000
[Sat Jun 15 05:28:34 2013] Offset between fit and detection position for source 25 = 0.112512 pixels
[Sat Jun 15 05:28:34 2013] 631.688000 total counts/ 437.773000 bgd. counts: snr = 9.268019
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.112512 pixels
  Position = (220.6, 289.0) = 23 25 53.87 28 28 5.8
  Extent = 8.2 (5.8-10.4)" x 6.1 (4.6-7.7)", rotation angle = 110 (55-138) degrees
  Source counts = 193.9 +/- 25.1
  Background counts = 437.8
  Rate = 0.003 +/- 0.0003
[Sat Jun 15 05:28:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:34 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 05:28:34 2013] Source does appear to be extended
[Sat Jun 15 05:28:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.75
[Sat Jun 15 06:39:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 06:39:59 2013] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Jun 15 06:39:59 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.092
[Sat Jun 15 06:39:59 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.13"
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 15 07:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 15 07:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 07:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 15 07:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 15 07:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 15 07:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:39:10 2013] Warning, spatial fit 5 centroid is now closest to src. 22
[Sat Jun 15 08:39:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:10 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:39:10 2013] Source does appear to be extended
[Sat Jun 15 08:39:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.75
[Sat Jun 15 10:06:55 2013] XMMSAS src. selection expression = ellipse(19142.195200, 25098.554400, 492.628214, 363.153010, 109.867699, X, Y)
[Sat Jun 15 10:06:55 2013] Writing source region out to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25_src.reg
[Sat Jun 15 10:06:55 2013] Extracting stamp from image fullrun_mos1_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (192, 261) - (249, 317)
[Sat Jun 15 10:06:55 2013] XMMSAS bgd. selection expression = annulus(19142.195200, 25098.554400, 821.047024, 1642.094047, X, Y) && !ellipse(21151.097824, 27608.637512, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:06:55 2013] Writing fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25.gif
[Sat Jun 15 10:10:11 2013] Mean detx,y = (-4710.06, -7357.74) 
[Sat Jun 15 10:10:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:10:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:10:33 2013] Setting source spectrum file to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun 15 10:10:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jun 15 11:42:23 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:23 2013] Total counts from fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 314.00
[Sat Jun 15 11:42:23 2013] Total counts from fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1301.00
[Sat Jun 15 11:42:23 2013] Got source and background scale factors 566400.000000, 5722228.000000
[Sat Jun 15 11:42:23 2013] User source parameters:
  Position = (220.6, 289.0) = 23 25 53.87 28 28 5.8
  Extent = 8.2 (5.8-10.4)" x 6.1 (4.6-7.7)", rotation angle = 110 (55-138) degrees
  Source aperture counts = 185.2 +/- 18.7
  Background aperture counts = 128.8
  Rate = 0.002 +/- 0.0002

[Sat Jun 15 11:42:28 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:28 2013] Using photon index=1.80, rate=0.00255, arf fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25.arf
[Sat Jun 15 11:42:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:28 2013] Updating source flux to 4.8e-14
[Sat Jun 15 11:42:46 2013] xmm0553870101/analysis//spectral/fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete