[Sat Jun 15 01:44:08 2013] Detection parameters:
  Position = (121.0, 333.9) = 23 26 26.74 28 31 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.4 +/- 19.9
  Background counts = 46.3
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 01:44:10 2013] Off-axis axis estimate = 13.12'
[Sat Jun 15 03:22:36 2013] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:22:36 2013] Initial guess for spatial extent in simple fitting = 12.99"
[Sat Jun 15 03:22:36 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.008
[Sat Jun 15 03:22:36 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.99"
[Sat Jun 15 04:16:57 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 15 04:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 15 04:16:58 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jun 15 04:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 15 04:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:28:34 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.850048 pixels away
[Sat Jun 15 05:28:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 05:28:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 05:28:34 2013] Assessing source extent using major
[Sat Jun 15 05:28:34 2013] Source does appear to be extended
[Sat Jun 15 05:28:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 06:39:59 2013] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 06:39:59 2013] Initial guess for spatial extent in simple fitting = 12.99"
[Sat Jun 15 06:39:59 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.008
[Sat Jun 15 06:39:59 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 12.99"
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jun 15 07:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src16.csv
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jun 15 07:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src16.csv
[Sat Jun 15 07:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jun 15 07:32:28 2013] fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jun 15 07:32:28 2013] Fit fullrun_mos1_xmm0553870101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Jun 15 08:39:10 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.992944 pixels away
[Sat Jun 15 08:39:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:39:10 2013] Assessing source extent using major
[Sat Jun 15 08:39:10 2013] Source does appear to be extended
[Sat Jun 15 08:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:06:55 2013] XMMSAS src. selection expression = ellipse(10482.657112, 29000.690613, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:06:55 2013] Writing source region out to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 15 10:06:55 2013] Extracting stamp from image fullrun_mos1_xmm0553870101_pi300-10000_cl_sm2.00.img.gz, (84, 296) - (159, 371)
[Sat Jun 15 10:06:55 2013] XMMSAS bgd. selection expression = annulus(10482.657112, 29000.690613, 1087.500000, 2175.000000, X, Y) && !ellipse(12239.851746, 26130.577393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11593.642838, 29790.275085, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:06:55 2013] Writing fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2.gif
[Sat Jun 15 10:15:03 2013] Mean detx,y = (-4335.58, -16773.08) 
[Sat Jun 15 10:15:05 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:15:22 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:15:23 2013] Setting source spectrum file to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 15 10:15:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 15 10:40:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 10:40:13 2013] rmf not generated due to insufficient counts
[Sat Jun 15 11:42:24 2013] Updating aperture counts using extracted products
[Sat Jun 15 11:42:24 2013] Total counts from fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 384.00
[Sat Jun 15 11:42:24 2013] Total counts from fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 728.00
[Sat Jun 15 11:42:24 2013] Got source and background scale factors 1164112.000000, 3338911.000000
[Sat Jun 15 11:42:24 2013] User source parameters:
  Position = (121.0, 333.9) = 23 26 26.74 28 31 20.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 130.2 +/- 20.6
  Background aperture counts = 253.8
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 11:42:24 2013] Updating counts from extracted products
[Sat Jun 15 11:42:24 2013] Set source signif. to 130.18/15.93 = 8.17
[Sat Jun 15 11:42:28 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 11:42:28 2013] Using photon index=1.80, rate=0.00171, arf fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2.arf
[Sat Jun 15 11:42:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 11:42:28 2013] Updating source flux to 6.9e-14
[Sat Jun 15 11:42:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 11:42:46 2013] xmm0553870101/analysis//spectral/fullrun_mos1_xmm0553870101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete