[Wed Jul  4 01:55:16 2012] Detection parameters:
  Position = (349.6, 327.7) = 17 34 4.66 -33 29 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.9 +/- 8.2
  Background counts = 11.8
  Rate = 0.004 +/- 0.001

[Wed Jul  4 01:55:17 2012] Off-axis axis estimate = 4.27'
[Wed Jul  4 02:55:12 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 02:55:12 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed Jul  4 02:55:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Wed Jul  4 02:55:12 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.56"
[Wed Jul  4 03:09:42 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jul  4 03:09:42 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jul  4 03:09:42 2012] Fit fullrun_mos2_xmm0553850101_pi300-10000_cl_pass0_src10 appears to have run properly
[Wed Jul  4 03:09:42 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jul  4 03:09:42 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jul  4 03:09:42 2012] Fit fullrun_mos2_xmm0553850101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Jul  4 03:09:49 2012] Spatial fit model total counts = 149.812000, observed total counts = 150.000000
[Wed Jul  4 03:09:49 2012] Offset between fit and detection position for source 10 = 4.140703 pixels
[Wed Jul  4 03:09:49 2012] 139.208100 total counts/ 44.090100 bgd. counts: snr = 14.324919
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.140703 pixels
  Position = (352.6, 330.5) = 17 34 3.60 -33 29 44.8
  Extent = 17.1 (17.1-34.3)", rotation angle = 0
  Source counts = 95.1 +/- 11.8
  Background counts = 44.1
  Rate = 0.009 +/- 0.001
[Wed Jul  4 03:09:49 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:09:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:09:49 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 03:09:49 2012] Source does appear to be extended
[Wed Jul  4 03:09:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:09:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 04:09:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 04:09:46 2012] Initial guess for spatial extent in simple fitting = 17.13"
[Wed Jul  4 04:09:46 2012] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.028
[Wed Jul  4 04:09:46 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 17.13"
[Wed Jul  4 04:20:52 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul  4 04:20:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_src9.csv
[Wed Jul  4 04:20:52 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul  4 04:20:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_src9.csv
[Wed Jul  4 04:20:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 04:20:52 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul  4 04:20:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jul  4 04:20:52 2012] fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul  4 04:20:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jul  4 04:20:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 04:20:59 2012] Spatial fit model total counts = 329.220000, observed total counts = 296.000000
[Wed Jul  4 04:20:59 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  4 04:20:59 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 04:20:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 04:20:59 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 04:20:59 2012] Source does appear to be extended
[Wed Jul  4 04:20:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:56:43 2012] XMMSAS src. selection expression = ellipse(30628.504000, 28703.120000, 1027.620030, 1027.620030, 0.000000, X, Y)
[Wed Jul  4 04:56:43 2012] Writing source region out to fullrun_mos2_xmm0553850101_pi300-10000_pass1_cl_src10_src.reg
[Wed Jul  4 04:56:43 2012] Extracting stamp from image fullrun_mos2_xmm0553850101_pi300-10000_cl_sm2.00.img.gz, (294, 271) - (412, 390)
[Wed Jul  4 04:56:43 2012] XMMSAS bgd. selection expression = annulus(30628.504000, 28703.120000, 1712.700049, 3425.400099, X, Y)
[Wed Jul  4 04:56:43 2012] Writing fullrun_mos2_xmm0553850101_pi300-10000_pass1_cl_src10.gif
[Wed Jul  4 04:58:06 2012] Mean detx,y = (5879.48, -4350.07) 
[Wed Jul  4 04:58:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 04:58:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 04:58:26 2012] Setting source spectrum file to fullrun_mos2_xmm0553850101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul  4 04:58:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553850101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jul  4 05:02:41 2012] Not generating rmf since there are only 95 counts
[Wed Jul  4 05:02:41 2012] rmf not generated due to insufficient counts
[Wed Jul  4 05:03:22 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:03:22 2012] Error reading totcts from fullrun_mos2_xmm0553850101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul  4 05:03:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:03:22 2012] Using photon index=1.80, rate=0.00896, arf fullrun_mos2_xmm0553850101_pi300-10000_pass1_cl_src10.arf
[Wed Jul  4 05:03:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:03:22 2012] Updating source flux to 1.2e-13
[Wed Jul  4 05:03:47 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Wed Jul  4 05:03:47 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting