[Wed Jul  4 01:55:04 2012] Detection parameters:
  Position = (385.7, 302.1) = 17 33 52.07 -33 31 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.3 +/- 9.7
  Background counts = 10.7
  Rate = 0.008 +/- 0.002

[Wed Jul  4 01:55:04 2012] Off-axis axis estimate = 6.33'
[Wed Jul  4 02:27:10 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 02:27:10 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Jul  4 02:27:10 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.024
[Wed Jul  4 02:27:10 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.60"
[Wed Jul  4 02:55:12 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jul  4 02:55:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_src6.csv
[Wed Jul  4 02:55:12 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jul  4 02:55:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_src6.csv
[Wed Jul  4 02:55:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 02:55:12 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jul  4 02:55:12 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jul  4 02:55:12 2012] Fit fullrun_mos1_xmm0553850101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jul  4 03:09:47 2012] Spatial fit model total counts = 177.252000, observed total counts = 178.000000
[Wed Jul  4 03:09:47 2012] Offset between fit and detection position for source 6 = 0.790994 pixels
[Wed Jul  4 03:09:47 2012] 166.266500 total counts/ 126.935000 bgd. counts: snr = 3.491000
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.790994 pixels
  Position = (386.4, 302.5) = 17 33 51.83 -33 31 46.3
  Extent = 7.2 (4.6-10.0)", rotation angle = 0
  Source counts = 39.3 +/- 12.9
  Background counts = 126.9
  Rate = 0.004 +/- 0.001
[Wed Jul  4 03:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:09:47 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 03:09:47 2012] Source does appear to be extended
[Wed Jul  4 03:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 03:09:47 2012] Source is confused with source 7
[Wed Jul  4 03:37:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 03:37:11 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Wed Jul  4 03:37:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.350
[Wed Jul  4 03:37:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.18"
[Wed Jul  4 04:09:45 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul  4 04:09:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_src5.csv
[Wed Jul  4 04:09:45 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul  4 04:09:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_src5.csv
[Wed Jul  4 04:09:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 04:09:45 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul  4 04:09:45 2012] fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul  4 04:09:45 2012] Fit fullrun_mos1_xmm0553850101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jul  4 04:20:58 2012] Spatial fit model total counts = 176.969000, observed total counts = 178.000000
[Wed Jul  4 04:20:58 2012] Offset between fit and detection position for source 6 = 0.088041 pixels
[Wed Jul  4 04:20:58 2012] 164.755800 total counts/ 124.076000 bgd. counts: snr = 3.652035
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.088041 pixels
  Position = (386.3, 302.5) = 17 33 51.87 -33 31 46.4
  Extent = 7.4 (4.7-10.1)", rotation angle = 0
  Source counts = 40.7 +/- 12.8
  Background counts = 124.1
  Rate = 0.004 +/- 0.001
[Wed Jul  4 04:20:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 04:20:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 04:20:58 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 04:20:58 2012] Source does appear to be extended
[Wed Jul  4 04:20:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:41:39 2012] XMMSAS src. selection expression = ellipse(33561.676600, 26269.376200, 441.955213, 441.955213, 0.000000, X, Y)
[Wed Jul  4 04:41:39 2012] Writing source region out to fullrun_mos1_xmm0553850101_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul  4 04:41:39 2012] Extracting stamp from image fullrun_mos1_xmm0553850101_pi300-10000_cl_sm2.00.img.gz, (361, 277) - (412, 328)
[Wed Jul  4 04:41:39 2012] XMMSAS bgd. selection expression = annulus(33561.676600, 26269.376200, 736.592021, 1473.184042, X, Y) && !ellipse(33214.892000, 23966.312000, 1188.792034, 1188.792034, 0.000000, X, Y) && !ellipse(32045.110000, 25233.608000, 1457.400042, 1457.400042, 0.000000, X, Y) && !ellipse(32507.906000, 25654.324000, 1505.560043, 1505.560043, 0.000000, X, Y) && !ellipse(33015.013200, 25912.468200, 1505.560043, 192.184006, 327.912000, X, Y) && !ellipse(34923.377800, 25136.947600, 824.160024, 824.160024, 0.000000, X, Y)
[Wed Jul  4 04:41:39 2012] Writing fullrun_mos1_xmm0553850101_pi300-10000_pass1_cl_src6.gif
[Wed Jul  4 04:42:13 2012] Mean detx,y = (-1507.30, -8995.93) 
[Wed Jul  4 04:42:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 04:42:19 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 04:42:19 2012] Setting source spectrum file to fullrun_mos1_xmm0553850101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 04:42:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553850101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul  4 04:49:10 2012] Not generating rmf since there are only 40 counts
[Wed Jul  4 04:49:10 2012] rmf not generated due to insufficient counts
[Wed Jul  4 05:03:21 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:03:21 2012] Error reading totcts from fullrun_mos1_xmm0553850101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 05:03:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:03:21 2012] Using photon index=1.80, rate=0.00383, arf fullrun_mos1_xmm0553850101_pi300-10000_pass1_cl_src6.arf
[Wed Jul  4 05:03:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:03:21 2012] Updating source flux to 7e-14
[Wed Jul  4 05:03:22 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Wed Jul  4 05:03:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting