[Fri Jul 13 05:15:58 2012] Detection parameters:
  Position = (256.1, 365.2) = 8 2 50.76 39 19 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1895.9 +/- 55.7
  Background counts = 166.8
  Rate = 0.06 +/- 0.002

[Fri Jul 13 05:15:58 2012] Off-axis axis estimate = 5.73'
[Fri Jul 13 05:45:12 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:45:12 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Fri Jul 13 05:45:12 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.079
[Fri Jul 13 05:45:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.29"
[Fri Jul 13 05:52:03 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 05:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 05:52:03 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 05:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 05:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:52:03 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 05:52:03 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 05:52:03 2012] Fit fullrun_mos1_xmm0553790701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 06:11:40 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.292062 pixels away
[Fri Jul 13 06:11:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:11:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:11:40 2012] Assessing source extent using major
[Fri Jul 13 06:11:40 2012] Source does appear to be extended
[Fri Jul 13 06:11:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:32:22 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 06:32:22 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Fri Jul 13 06:32:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.079
[Fri Jul 13 06:32:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.29"
[Fri Jul 13 06:37:51 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 06:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 06:37:51 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 06:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 06:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 06:37:52 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 06:37:52 2012] fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 06:37:52 2012] Fit fullrun_mos1_xmm0553790701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 06:55:39 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.468719 pixels away
[Fri Jul 13 06:55:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:55:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:55:39 2012] Assessing source extent using major
[Fri Jul 13 06:55:39 2012] Source does appear to be extended
[Fri Jul 13 06:55:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 07:15:21 2012] Counts = 1895.943848, rescaling region sizes by 2.000000
[Fri Jul 13 07:15:21 2012] XMMSAS src. selection expression = ellipse(22229.784454, 31723.508118, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 13 07:15:21 2012] Writing source region out to fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 13 07:15:21 2012] Extracting stamp from image fullrun_mos1_xmm0553790701_pi300-10000_cl_sm2.00.img.gz, (181, 290) - (331, 440)
[Fri Jul 13 07:15:21 2012] XMMSAS bgd. selection expression = annulus(22229.784454, 31723.508118, 4350.000000, 8700.000000, X, Y) && !ellipse(25673.311200, 23656.192600, 462.240813, 359.811210, 335.843135, X, Y) && !ellipse(20156.635361, 26758.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15667.874237, 26481.320038, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 07:15:21 2012] Writing fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2.gif
[Fri Jul 13 07:15:24 2012] Mean detx,y = (5273.13, -2956.78) 
[Fri Jul 13 07:15:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 07:16:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 07:16:36 2012] Setting source spectrum file to fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 07:16:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 13 07:18:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 13 07:18:22 2012] rmf not generated due to insufficient counts
[Fri Jul 13 07:36:15 2012] Updating aperture counts using extracted products
[Fri Jul 13 07:36:15 2012] Error reading totcts from fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 07:36:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 07:36:15 2012] Using photon index=1.80, rate=0.0582, arf fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2.arf
[Fri Jul 13 07:36:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 07:36:15 2012] Updating source flux to 6.4e-13
[Fri Jul 13 07:36:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 13 07:36:27 2012] xmm0553790701/analysis//spectral/fullrun_mos1_xmm0553790701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete