[Sun Jun 23 07:38:51 2013] Detection parameters:
  Position = (268.3, 428.1) = 2 14 3.18 13 8 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.3 +/- 9.8
  Background counts = 9.0
  Rate = 0.002 +/- 0.0004

[Sun Jun 23 07:38:51 2013] Off-axis axis estimate = 9.65'
[Sun Jun 23 08:40:54 2013] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:40:54 2013] Initial guess for spatial extent in simple fitting = 11.25"
[Sun Jun 23 08:40:54 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Sun Jun 23 08:40:54 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 11.25"
[Sun Jun 23 09:05:39 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 23 09:05:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_src12.csv
[Sun Jun 23 09:05:39 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 23 09:05:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_src12.csv
[Sun Jun 23 09:05:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:05:40 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 23 09:05:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 23 09:05:40 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 23 09:05:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 23 09:05:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553790401_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:33:19 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.286740 pixels away
[Sun Jun 23 09:33:19 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 09:33:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 09:33:19 2013] Assessing source extent using major
[Sun Jun 23 09:33:19 2013] Source does appear to be extended
[Sun Jun 23 09:33:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:29:26 2013] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:29:26 2013] Initial guess for spatial extent in simple fitting = 11.25"
[Sun Jun 23 10:29:26 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Sun Jun 23 10:29:26 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 11.25"
[Sun Jun 23 10:47:26 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 23 10:47:26 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 23 10:47:26 2013] Fit fullrun_mos1_xmm0553790401_pi300-10000_cl_pass1_src12 appears to have run properly
[Sun Jun 23 10:47:26 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 23 10:47:26 2013] fullrun_mos1_xmm0553790401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 23 10:47:26 2013] Fit fullrun_mos1_xmm0553790401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun 23 11:11:34 2013] Spatial fit model total counts = 135.417000, observed total counts = 133.000000
[Sun Jun 23 11:11:34 2013] Offset between fit and detection position for source 3 = 0.892431 pixels
[Sun Jun 23 11:11:34 2013] 135.154700 total counts/ 61.976600 bgd. counts: snr = 9.295382
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.892431 pixels
  Position = (268.8, 428.8) = 2 14 3.01 13 8 18.1
  Extent = 20.7 (17.1-22.5)" x 6.9 (4.1-10.7)", rotation angle = 315 (305-324) degrees
  Source counts = 73.2 +/- 11.6
  Background counts = 62.0
  Rate = 0.003 +/- 0.0005
[Sun Jun 23 11:11:34 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:11:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:11:34 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:11:34 2013] Source does appear to be extended
[Sun Jun 23 11:11:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Sun Jun 23 11:11:34 2013] Source is asymmetric
[Sun Jun 23 11:52:27 2013] XMMSAS src. selection expression = ellipse(23341.336200, 37256.193980, 1242.282036, 416.066412, 314.901051, X, Y)
[Sun Jun 23 11:52:27 2013] Writing source region out to fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 23 11:52:27 2013] Extracting stamp from image fullrun_mos1_xmm0553790401_pi300-10000_cl_sm2.00.img.gz, (197, 357) - (340, 500)
[Sun Jun 23 11:52:27 2013] XMMSAS bgd. selection expression = annulus(23341.336200, 37256.193980, 2070.470060, 4140.940119, X, Y) && !ellipse(23606.475555, 34445.157410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.373718, 36134.934875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21492.210400, 39202.466600, 641.335218, 209.289606, 311.702844, X, Y)
[Sun Jun 23 11:52:27 2013] Writing fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3.gif
[Sun Jun 23 11:56:19 2013] Mean detx,y = (8426.60, -7672.51) 
[Sun Jun 23 11:56:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 11:56:53 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 11:56:53 2013] Setting source spectrum file to fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 23 11:56:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 23 12:06:05 2013] Not generating rmf since there are only 73 counts
[Sun Jun 23 12:06:05 2013] rmf not generated due to insufficient counts
[Sun Jun 23 12:23:09 2013] Updating aperture counts using extracted products
[Sun Jun 23 12:23:09 2013] Total counts from fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 100.00
[Sun Jun 23 12:23:09 2013] Total counts from fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1553.00
[Sun Jun 23 12:23:09 2013] Got source and background scale factors 1414483.000000, 33704039.000000
[Sun Jun 23 12:23:09 2013] User source parameters:
  Position = (268.8, 428.8) = 2 14 3.01 13 8 18.1
  Extent = 20.7 (17.1-22.5)" x 6.9 (4.1-10.7)", rotation angle = 315 (305-324) degrees
  Source aperture counts = 34.8 +/- 11.0
  Background aperture counts = 65.2
  Rate = 0.001 +/- 0.0005

[Sun Jun 23 12:23:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 12:23:10 2013] Using photon index=1.80, rate=0.00301, arf fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3.arf
[Sun Jun 23 12:23:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 12:23:10 2013] Updating source flux to 6.6e-14
[Sun Jun 23 12:23:19 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 12:23:22 2013] xmm0553790401/analysis//spectral/fullrun_mos1_xmm0553790401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete