[Thu Dec 22 22:47:08 2011] Detection parameters:
  Position = (462.4, 339.3) = 14 33 30.93 2 9 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 8.4
  Background counts = 8.3
  Rate = 0.002 +/- 0.0004

[Thu Dec 22 22:47:10 2011] Off-axis axis estimate = 12.25'
[Fri Dec 23 00:51:09 2011] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 00:51:09 2011] Initial guess for spatial extent in simple fitting = 12.55"
[Fri Dec 23 00:51:09 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.068
[Fri Dec 23 00:51:09 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 12.55"
[Fri Dec 23 01:47:32 2011] fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_src19.ximg exists
[Fri Dec 23 01:47:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 01:47:32 2011] fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Dec 23 01:47:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 01:47:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 01:47:33 2011] fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Dec 23 01:47:33 2011] fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Dec 23 01:47:33 2011] Fit fullrun_mos2_xmm0553790301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Dec 23 01:47:58 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.813912 pixels away
[Fri Dec 23 01:47:58 2011] Spatial fit model total counts = 121.817000, observed total counts = 121.000000
[Fri Dec 23 01:47:58 2011] Offset between fit and detection position for source 9 = 0.485326 pixels
[Fri Dec 23 01:47:58 2011] 120.977700 total counts/ 104.264000 bgd. counts: snr = 1.636837
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.485326 pixels
  Position = (461.9, 339.2) = 14 33 31.07 2 9 0.9
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 16.7 +/- 11.0
  Background counts = 104.3
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability