[Thu Dec 22 22:46:25 2011] Detection parameters:
  Position = (400.9, 319.9) = 14 33 48.78 2 7 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.2 +/- 9.6
  Background counts = 9.7
  Rate = 0.004 +/- 0.0007

[Thu Dec 22 22:46:26 2011] Off-axis axis estimate = 7.59'
[Fri Dec 23 00:04:25 2011] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 00:04:25 2011] Initial guess for spatial extent in simple fitting = 10.22"
[Fri Dec 23 00:04:25 2011] source mask rpix=2.3, npix_max = 32, mask sum = 31, frac = 0.954
[Fri Dec 23 00:04:25 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.22"
[Fri Dec 23 00:51:09 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_src6.ximg exists
[Fri Dec 23 00:51:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_src6.csv
[Fri Dec 23 00:51:09 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Dec 23 00:51:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_src6.csv
[Fri Dec 23 00:51:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:51:09 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Dec 23 00:51:09 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Dec 23 00:51:09 2011] Fit fullrun_mos1_xmm0553790301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Dec 23 01:47:51 2011] Spatial fit model total counts = 144.997000, observed total counts = 145.000000
[Fri Dec 23 01:47:51 2011] Offset between fit and detection position for source 12 = 0.396180 pixels
[Fri Dec 23 01:47:51 2011] 141.066900 total counts/ 110.172000 bgd. counts: snr = 2.943413
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.396180 pixels
  Position = (400.6, 320.2) = 14 33 48.86 2 7 38.1
  Extent = 3.4 (2.6-5.2)", rotation angle = 0
  Source counts = 30.9 +/- 11.9
  Background counts = 110.2
  Rate = 0.001 +/- 0.0005
[Fri Dec 23 01:47:51 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 01:47:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 01:47:51 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 01:47:51 2011] Source does appear to be extended
[Fri Dec 23 01:47:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 03:06:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 03:06:58 2011] Initial guess for spatial extent in simple fitting = 3.41"
[Fri Dec 23 03:06:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.910
[Fri Dec 23 03:06:58 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 3.41"
[Fri Dec 23 04:03:11 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Dec 23 04:03:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_src6.csv
[Fri Dec 23 04:03:11 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Dec 23 04:03:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_src6.csv
[Fri Dec 23 04:03:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:03:11 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Dec 23 04:03:11 2011] fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Dec 23 04:03:11 2011] Fit fullrun_mos1_xmm0553790301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Dec 23 04:53:53 2011] Spatial fit model total counts = 148.995000, observed total counts = 149.000000
[Fri Dec 23 04:53:53 2011] Offset between fit and detection position for source 12 = 0.011970 pixels
[Fri Dec 23 04:53:53 2011] 145.164300 total counts/ 115.479000 bgd. counts: snr = 2.762421
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.011970 pixels
  Position = (400.6, 320.2) = 14 33 48.85 2 7 38.1
  Extent = 3.2 (2.4-4.9)", rotation angle = 0
  Source counts = 29.7 +/- 12.0
  Background counts = 115.5
  Rate = 0.001 +/- 0.0005
[Fri Dec 23 04:53:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:53:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:53:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 04:53:53 2011] Source does appear to be extended
[Fri Dec 23 04:53:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 06:02:39 2011] XMMSAS src. selection expression = ellipse(34806.320200, 27807.722600, 193.650006, 193.650006, 0.000000, X, Y)
[Fri Dec 23 06:02:39 2011] Writing source region out to fullrun_mos1_xmm0553790301_pi300-10000_pass1_cl_src12_src.reg
[Fri Dec 23 06:02:39 2011] Extracting stamp from image fullrun_mos1_xmm0553790301_pi300-10000_cl_sm2.00.img.gz, (390, 309) - (412, 331)
[Fri Dec 23 06:02:39 2011] XMMSAS bgd. selection expression = annulus(34806.320200, 27807.722600, 322.750009, 645.500019, X, Y)
[Fri Dec 23 06:02:39 2011] Writing fullrun_mos1_xmm0553790301_pi300-10000_pass1_cl_src12.gif
[Fri Dec 23 06:05:11 2011] Mean detx,y = (-2857.61, 7606.92) 
[Fri Dec 23 06:05:13 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 06:05:26 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 06:05:27 2011] Setting source spectrum file to fullrun_mos1_xmm0553790301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Dec 23 06:05:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0553790301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Dec 23 06:18:03 2011] Not generating rmf since there are only 29 counts
[Fri Dec 23 06:18:03 2011] rmf not generated due to insufficient counts
[Fri Dec 23 06:36:38 2011] Updating aperture counts using extracted products
[Fri Dec 23 06:36:38 2011] Error reading totcts from fullrun_mos1_xmm0553790301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Dec 23 06:36:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 06:36:39 2011] Using photon index=1.80, rate=0.00132, arf fullrun_mos1_xmm0553790301_pi300-10000_pass1_cl_src12.arf
[Fri Dec 23 06:36:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 06:36:39 2011] Updating source flux to 3.3e-14
[Fri Dec 23 06:36:43 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting